IIAB/Overview/IIAB Users Guide: Difference between revisions

From CIRPwiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 22: Line 22:


===INPUT FILE STRUCTURE:===
===INPUT FILE STRUCTURE:===
 
[[Image:Picture1.png|thumb|right|200px|]]


Blah blah blah
Blah blah blah

Revision as of 20:46, 21 May 2012

Inlet Impacts on Adjacent Beaches - IIAB Java Program User's Guide

by Julie D. Rosati and Charles A. Sumner

PURPOSE:

This Wiki-Technical note provides a User's Guide to the IIAB Java Program, which is available for download on the CIRP website[[1]]. For an inlet system bounded by adjacent beaches, the IIAB Program uses methods outlined in the Coastal Engineering Manual (CEM) Part V-6 to estimate the alongshore extent of inlet impact based on the volume captured by the inlet. The user can load shoreline position, ebb and flood shoal volume (or volume change), and Operation & Maintenance (O&M) dredging volumes (or volume change) data to view plots and results.

CITATION:

 Rosati, J.D., and Sumner, C.A. 2012. "Inlet Impacts on Adjacent Beaches - IIAB Java Program User's Guide," Wiki-TN-12-2, Vicksburg, MS: U.S. Army Engineer Research 
and Development Center.

INTRODUCTION:

The Inlet Impacts on Adjacent Beaches (IIAB) Java Program applies methods discussed in the Coastal Engineering Manual (CEM) Part V-6 (see p. V-6-29) to estimate the volumetric impact of an inlet on the adjacent beaches. Generally, the methods balance volume change on the updrift and downdrift beaches with the volume captured by the inlet, accounting for Operation & Maintenance (O&M) dredging (Figure 1).

Figure1IIABv4.jpg

Five methods are described in the CEM to estimate the alongshore extent of inlet influence: (1) evaluation of historical shoreline (or volumetric) change; (2) even-odd analysis;(3) alongshore variations in beach morphology;(4) wave refraction analysis; and (5) examination of the "total inlet sink", or volume captured by the inlet during the period of interest. The IIAB Program facilitates evaluation of Methods 1, 2, and 5, using shoreline position, berm crest and depth of closure data; ebb and flood shoal volume (or volume change) data; and O&M dredging volumes (or volume change) data. The user can upload *.csv (comma separated values) files with the data; example data files are provided both in U.S. customary and metric units. IIAB and the example files can be downloaded from the CIRP website [[2]], copied to a directory on the user's PC and unzipped.

AN OVERVIEW OF THE GRAPHICAL USER INTERFACE:

Blah blah blah


INPUT FILE STRUCTURE:

Picture1.png

Blah blah blah

UPLOADING FILES:

Blah blah blah

CALCULATIONS:

Blah blah blah

DISCUSSION:

Blah blah blah

CONCLUSIONS:

Blah blah blah

REFERENCES:

ref1 ref2