View source for IIAB/Overview/IIAB Users Guide

You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in the group: CIRP.
You can view and copy the source of this page.
__NOTOC__
== Inlet Impacts on Adjacent Beaches - IIAB Java Program User's Guide==

<div style="text-align:left">'''''by Julie D. Rosati and Charles A. Sumner'''''</div>

===PURPOSE:===
This Wiki-Technical note provides a User's Guide to the IIAB Java Program, which is available for download on the CIRP website[[http://cirp.usace.army.mil/products/?tab=10]].  For an inlet system bounded by adjacent beaches, the IIAB Program uses methods outlined in the Coastal Engineering Manual (CEM) Part V-6 to estimate the alongshore extent of inlet impact based on the volume captured by the inlet. The user can load shoreline position, ebb and flood shoal volume (or volume change), and Operation & Maintenance (O&M) dredging volumes (or volume change) data to view plots and results.
   
===CITATION:===
  ''Rosati, J.D., and Sumner, C.A. 2012. "Inlet Impacts on Adjacent Beaches - IIAB Java Program User's Guide," Wiki-TN-12-2, Vicksburg, MS: U.S. Army Engineer Research <br> and Development Center.''

===INTRODUCTION:===
The Inlet Impacts on Adjacent Beaches (IIAB) Java Program applies methods discussed in the Coastal Engineering Manual (CEM) Part V-6 (see p. V-6-29) to estimate the volumetric impact of an inlet on the adjacent beaches. Generally, the methods balance volume change on the updrift and downdrift beaches with the volume captured by the inlet, accounting for Operation & Maintenance (O&M) dredging (Figure 1).
[[Image:Figure1IIABv4.jpg|thumb|right|200px|]]  

Five methods are described in the CEM to estimate the alongshore extent of inlet influence: (1) evaluation of historical shoreline (or volumetric) change; (2) even-odd analysis;(3) alongshore variations in beach morphology;(4) wave refraction analysis; and (5) examination of the "total inlet sink", or volume captured by the inlet during the period of interest.  The IIAB Program facilitates evaluation of Methods 1, 2, and 5, using shoreline position, berm crest and depth of closure data; ebb and flood shoal volume (or volume change) data; and O&M dredging volumes (or volume change) data. The user can upload *.csv (comma separated values) files with the data; example data files are provided both in U.S. customary and metric units. IIAB and the example files can be downloaded from the CIRP website [[http://cirp.usace.army.mil/products/?tab=10]], copied to a directory on the user's PC and unzipped.

=== AN OVERVIEW OF THE GRAPHICAL USER INTERFACE:===

Blah blah blah


===INPUT FILE STRUCTURE:===
All input files should be in either the .csv or .txt file formats.  For either file format, the structure of the data within the file will be exactly the same.
User data should be formatted as follows with all values delimited with commas:

The number of years or data sets
Date1, Date2, etc.....
Distance from inlet, berm, depth of closure, shore position at year1, shore position at year2, etc
0(inlet),0,0,0,0....etc
....
Distance from inlet,berm,depth of closure,shore position at year1,shore position at year2,etc.

The centerline of the inlet must be marked with just a '0' for every column across that row.

Here is an example of a properly formatted file with two years of data (1927 and 1956):


'2

1927,1956

37.5,3,6,110,105.5

35,3,6,105,97.5

32.5,3,6,100,103.2

30,3,6,97,99

27.5,3,6,102,97.6

25,3,6,111,113.1

22.5,3,6,87,94.4

20,3,6,65,70.4

17.5,3,6,89,114.6

15,3,6,72,93.2

12.5,3,6,90,107.5

10,3,6,92,120.5

7.5,3,6,95,150

5,3,6,102,158.2

2.5,3,6,101,176.3

0,0,0,0,0

-2.5,2.6,6,55,47

-5,2.7,6,47,-39

-7.5,2.7,6,40,-59

-10,2.8,6,54,-12

-12.5,2.9,6,62,20

-15,3,6,87,78

-17.5,3.1,6,76,79.4

-20,3,6,62,52

-22.5,3,6,66,54

-25,3,6,78,51

-27.5,3,6,87,60

-30,3,6,82,66

-32.5,3,6,92,68

-35,3,6,98,80

-37.5,3,6,102,90'

=== UPLOADING FILES: ===

Blah blah blah

=== CALCULATIONS: ===


Blah blah blah

=== DISCUSSION: ===


Blah blah blah

=== CONCLUSIONS: ===


Blah blah blah

=== REFERENCES: ===


ref1
ref2
Return to IIAB/Overview/IIAB Users Guide.
Retrieved from "https://cirpwiki.info/wiki/IIAB/Overview/IIAB_Users_Guide"
View source for IIAB/Overview/IIAB Users Guide

Navigation menu

Search
