CMS-Wave/Structures v1: Difference between revisions
mNo edit summary |
|||
| Line 12: | Line 12: | ||
= Bathymetry modification = | = Bathymetry modification = | ||
For this test case, we will assign the 4x4 center cells as structures with the 'Bathymetry Modification' type. Each cell should contain the modification value for a depth of 1 meter (as opposed to its Z-value of 1 meter elevation). | |||
[[File:Bathymod-structure.png|300px|alt= | To accomplish this, the user should select all 16 cells, then right click and choose "Cell Attributes", then choose 'Structure', Type should be 'Bathymetry Modification', check the box for "Use Modification", and enter the Depth value of 1.0. See the image below for an example of the Cell Attributes dialog. | ||
[[File:SMS13.1_attributes_Bathymod.png|300px|alt=Cell Attributes dialog for SMS 13.1.|Cell Attributes dialog for SMS 13.1.]] | |||
[[File:Bathymod-structure.png|300px|alt=Resulting image showing bathymetry and structure cells indicated.|Resulting image showing bathymetry and structure cells indicated.]] | |||
Click the link to download the input files for this case - [[Media:1-sms13.1 model-natives.zip | 1-sms13.1 model-natives.zip]] | Click the link to download the input files for this case - [[Media:1-sms13.1 model-natives.zip | 1-sms13.1 model-natives.zip]] | ||
Revision as of 14:11, 30 October 2024
For each of these test cases, we take a simple 20x20 square cartesian grid with non-variable resolution. The bathymetry is constant 3 meters deep except for the center 4x4 selection of cells which have an elevation of 1 meter. It is these center 4x4 selection of cells which will vary for each of the different structure types in some fashion. A link to the input files is available in each section for that type of structure discussed.
No Structure (default)
For this test case, there is no change from the initial setup. No structure cells have been defined.
Image of the model bathymetry.
Click the link to download the input files for this case - 0-sms13.1 model-natives.zip
Bathymetry modification
For this test case, we will assign the 4x4 center cells as structures with the 'Bathymetry Modification' type. Each cell should contain the modification value for a depth of 1 meter (as opposed to its Z-value of 1 meter elevation).
To accomplish this, the user should select all 16 cells, then right click and choose "Cell Attributes", then choose 'Structure', Type should be 'Bathymetry Modification', check the box for "Use Modification", and enter the Depth value of 1.0. See the image below for an example of the Cell Attributes dialog.
Click the link to download the input files for this case - 1-sms13.1 model-natives.zip
Floating Breakwater
Image of the model bathymetry and structure cells.
Simple bathymetry shown with structures indicated.
Click the link to download the input files for this case - 2-sms13.1 model-natives.zip
Highly-permeable Breakwater
Image of the model bathymetry and structure cells.
Simple bathymetry shown with structures indicated.
Click the link to download the input files for this case - 3-sms13.1 model-natives.zip
Semi-permeable Breakwater
Image of the model bathymetry and structure cells.
Simple bathymetry shown with structures indicated.
Click the link to download the input files for this case - 4-sms13.1 model-natives.zip
Rubble Mound
Image of the model bathymetry and structure cells.
Simple bathymetry shown with structures indicated.
Click the link to download the input files for this case - 5-sms13.1 model-natives.zip
Runup
Image of the model bathymetry and structure cells.
Simple bathymetry shown with structures indicated.
Click the link to download the input files for this case - 6-sms13.1 model-natives.zip
Wall Breakwater
Image of the model bathymetry and structure cells.
Simple bathymetry shown with structures indicated.
Click the link to download the input files for this case - 7-sms13.1 model-natives.zip
Back to CMS-Wave Structures