CMS-Wave/Structures v1: Difference between revisions

From CIRPwiki
Jump to navigation Jump to search
mNo edit summary
 
(15 intermediate revisions by the same user not shown)
Line 1: Line 1:
For each of these test cases, we take a simple 20x20 square cartesian grid with non-variable resolution. The bathymetry is constant 3 meters deep except for the center 4x4 selection of cells which have an elevation of  1 meter. It is these center 4x4 selection of cells which will vary for each of the different structure types in some fashion. A link to the input files is available in each section for that type of structure discussed.  
{{DISPLAYTITLE:CMS-Wave Structures for SMS 13.1 and previous}}
{{TOC right}}
For each of these test cases, we take a simple 20x20 square cartesian grid with non-variable resolution. The bathymetry varies starting at 4 meters deep along the outside extents of the domain and ramps to 3 meters deep until the center 4x4 selection of cells which will have varying depths/elevations depending on the case. It is these center 4x4 selection of cells which will vary for each of the different structure types in some fashion. A link to the input files is available in each section for that type of structure discussed.  
= No Structure (default) =
= No Structure (default) =
[[File:Square-structure.png|200px|thumb|right|alt=Simple bathymetry shown with '''NO''' structures indicated.|Simple bathymetry shown with '''NO'''  structures indicated.]]
For this test case, there is no change from the initial setup. No structure cells have been defined.  
For this test case, there is no change from the initial setup. No structure cells have been defined.  
Image of the model bathymetry.
[[File:Square-structure.png|300px|alt=Simple bathymetry shown with '''NO''' structures indicated.|Simple bathymetry shown with '''NO'''  structures indicated.]]




Click the link to download the input files for this case - [[Media:0-sms13.1 model-natives.zip | 0-sms13.1 model-natives.zip]]
Click the link to download the input files for this case - [[Media:0-sms13.1 model-natives.zip | 0-sms13.1 model-natives.zip]]
 
<br clear=both>
= Bathymetry modification =
= Bathymetry modification =
[[File:SMS13.1_attributes_Bathymod.png|200px|thumb|right|alt=Cell Attributes dialog for SMS 13.1.|Cell Attributes dialog for SMS 13.1.]]
[[File:Bathymod-structure.png|200px|thumb|right|alt=Resulting image showing bathymetry and structure cells indicated.|Resulting image showing bathymetry and structure cells indicated.]]
For this test case, we will assign the 4x4 center cells as structures with the 'Bathymetry Modification' type. Each cell should contain the modification value for a depth of 1 meter (as opposed to its Z-value of 1 meter elevation).
For this test case, we will assign the 4x4 center cells as structures with the 'Bathymetry Modification' type. Each cell should contain the modification value for a depth of 1 meter (as opposed to its Z-value of 1 meter elevation).


To accomplish this, the user should select all 16 cells, then right click and choose "Cell Attributes", then choose 'Structure', Type should be 'Bathymetry Modification', check the box for "Use Modification", and enter the Depth value of 1.0. See the image below for an example of the Cell Attributes dialog.
==Assign cell attributes==
To accomplish this, the user should select all 16 cells, then right click and choose "Cell Attributes", then choose 'Structure', Type should be 'Bathymetry Modification', check the box for "Use Modification", and enter the Depth value of 1.0. See the image to the right for an example of the Cell Attributes dialog.


[[File:SMS13.1_attributes_Bathymod.png|300px|alt=Cell Attributes dialog for SMS 13.1.|Cell Attributes dialog for SMS 13.1.]]
This same procedure is used for all the remaining structure types only changing the "Type" to the one for that category.


[[File:Bathymod-structure.png|300px|alt=Resulting image showing bathymetry and structure cells indicated.|Resulting image showing bathymetry and structure cells indicated.]]


Click the link to download the input files for this case - [[Media:1-sms13.1 model-natives.zip | 1-sms13.1 model-natives.zip]]
Click the link to download the input files for this case - [[Media:1-sms13.1 model-natives.zip | 1-sms13.1 model-natives.zip]]
<br clear=both>


= Floating Breakwater =
= Floating Breakwater =
Image of the model bathymetry and structure cells.
[[File:SMS13.1_attributes_FloatBW.png|200px|thumb|right|alt=Cell attributes dialog for the structure type indicated.|Cell attributes dialog for the structure type indicated.]]
For this test case, we will assign the 4x4 center cells as structures with the 'Floating breakwater' type. Each cell should contain the modification value for a draft of 2 meters. See the image to the right for an example of the Cell Attributes dialog.


[[File:FloatingBW-structure.png|300px|alt=Simple bathymetry shown with structure cells indicated.|Simple bathymetry shown with structures indicated.]]


Click the link to download the input files for this case - [[Media:2-sms13.1 model-natives.zip | 2-sms13.1 model-natives.zip]]
Click the link to download the input files for this case - [[Media:2-sms13.1 model-natives.zip | 2-sms13.1 model-natives.zip]]
<br clear=both>


= Highly-permeable Breakwater =
= Highly-permeable Breakwater =
Image of the model bathymetry and structure cells.
[[File:SMS13.1_attributes_HighlyPermBW.png|200px|thumb|right|alt=Cell attributes dialog for the structure type indicated.|Cell attributes dialog for the structure type indicated.]]
For this test case, we will assign the 4x4 center cells as structures with the 'Piers/docks - High permeability' type. Each cell should contain the modification value for a porous layer thickness of 2 meters deep. See the image to the right for an example of the Cell Attributes dialog.


[[File:HighlyPermeableBW-structure.png|300px|alt=Simple bathymetry shown with structure cells indicated.|Simple bathymetry shown with structures indicated.]]


Click the link to download the input files for this case - [[Media:3-sms13.1 model-natives.zip | 3-sms13.1 model-natives.zip]]
Click the link to download the input files for this case - [[Media:3-sms13.1 model-natives.zip | 3-sms13.1 model-natives.zip]]
 
<br clear=both>
= Semi-permeable Breakwater =
= Semi-permeable Breakwater =
Image of the model bathymetry and structure cells.
[[File:SMS13.1_attributes_SemiPermBW.png|200px|thumb|right|alt=Cell attributes dialog for the structure type indicated.|Cell attributes dialog for the structure type indicated.]]
For this test case, we will assign the 4x4 center cells as structures with the 'Rubble mound breakwater - Low permeability' type. Each cell should contain the modification value for a porous layer thickness of 2 meters deep. See the image to the right for an example of the Cell Attributes dialog.


[[File:SemiPermeableBW-structure.png|300px|alt=Simple bathymetry shown with structure cells indicated.|Simple bathymetry shown with structures indicated.]]


Click the link to download the input files for this case - [[Media:4-sms13.1 model-natives.zip | 4-sms13.1 model-natives.zip]]
Click the link to download the input files for this case - [[Media:4-sms13.1 model-natives.zip | 4-sms13.1 model-natives.zip]]
 
<br clear=both>
= Rubble Mound =
= Rubble Mound =
Image of the model bathymetry and structure cells.
[[File:SMS13.1_attributes_RubbleMound.png|200px|thumb|right|alt=Cell attributes dialog for the structure type indicated.|Cell attributes dialog for the structure type indicated.]]
For this test case, we will assign the 4x4 center cells as structures with the 'Rubble Mound' type. The "Use modification box should stay '''unchecked''' and no value entered. The top of the rubble mound will be the existing elevation as set for the Wave grid. See the image to the right for an example of the Cell Attributes dialog.


[[File:Rubblemound-structure.png|300px|alt=Simple bathymetry shown with structure cells indicated.|Simple bathymetry shown with structures indicated.]]


Click the link to download the input files for this case - [[Media:5-sms13.1 model-natives.zip | 5-sms13.1 model-natives.zip]]
Click the link to download the input files for this case - [[Media:5-sms13.1 model-natives.zip | 5-sms13.1 model-natives.zip]]
 
<br clear=both>
= Runup =
= Runup =
Image of the model bathymetry and structure cells.
[[File:SMS13.1_attributes_Runup.png|200px|thumb|right|alt=Cell attributes dialog for the structure type indicated.|Cell attributes dialog for the structure type indicated.]]
For this test case, we will assign the 4x4 center cells as structures with the 'Wave runup' type. The "Use modification box should stay '''unchecked''' and no value entered. See the image to the right for an example of the Cell Attributes dialog.


[[File:Runup-structure.png|300px|alt=Simple bathymetry shown with structure cells indicated.|Simple bathymetry shown with structures indicated.]]


Click the link to download the input files for this case - [[Media:6-sms13.1 model-natives.zip | 6-sms13.1 model-natives.zip]]
Click the link to download the input files for this case - [[Media:6-sms13.1 model-natives.zip | 6-sms13.1 model-natives.zip]]
 
<br clear=both>
= Wall Breakwater =
= Wall Breakwater =
Image of the model bathymetry and structure cells.
[[File:SMS13.1_attributes_WallBW.png|200px|thumb|right|alt=Cell attributes dialog for the structure type indicated.|Cell attributes dialog for the structure type indicated.]]
For this test case, we will assign the 4x4 center cells as structures with the 'Wall breakwater' type. The "Use modification box should stay '''unchecked''' and no value entered. See the image to the right for an example of the Cell Attributes dialog.


[[File:WallBW-structure.png|300px|alt=Simple bathymetry shown with structure cells indicated.|Simple bathymetry shown with structures indicated.]]


Click the link to download the input files for this case - [[Media:7-sms13.1 model-natives.zip | 7-sms13.1 model-natives.zip]]
Click the link to download the input files for this case - [[Media:7-sms13.1 model-natives.zip | 7-sms13.1 model-natives.zip]]
 
<br clear=both>


----
----
Back to [[CMS-Wave_Structures | CMS-Wave Structures]]
Back to [[CMS-Wave_Structures | CMS-Wave Structures]]
[[Category:CMS-Wave|C]]

Latest revision as of 17:26, 30 October 2024


For each of these test cases, we take a simple 20x20 square cartesian grid with non-variable resolution. The bathymetry varies starting at 4 meters deep along the outside extents of the domain and ramps to 3 meters deep until the center 4x4 selection of cells which will have varying depths/elevations depending on the case. It is these center 4x4 selection of cells which will vary for each of the different structure types in some fashion. A link to the input files is available in each section for that type of structure discussed.

No Structure (default)

Simple bathymetry shown with NO structures indicated.
Simple bathymetry shown with NO structures indicated.

For this test case, there is no change from the initial setup. No structure cells have been defined.


Click the link to download the input files for this case - 0-sms13.1 model-natives.zip

Bathymetry modification

Cell Attributes dialog for SMS 13.1.
Cell Attributes dialog for SMS 13.1.
Resulting image showing bathymetry and structure cells indicated.
Resulting image showing bathymetry and structure cells indicated.

For this test case, we will assign the 4x4 center cells as structures with the 'Bathymetry Modification' type. Each cell should contain the modification value for a depth of 1 meter (as opposed to its Z-value of 1 meter elevation).

Assign cell attributes

To accomplish this, the user should select all 16 cells, then right click and choose "Cell Attributes", then choose 'Structure', Type should be 'Bathymetry Modification', check the box for "Use Modification", and enter the Depth value of 1.0. See the image to the right for an example of the Cell Attributes dialog.

This same procedure is used for all the remaining structure types only changing the "Type" to the one for that category.


Click the link to download the input files for this case - 1-sms13.1 model-natives.zip

Floating Breakwater

Cell attributes dialog for the structure type indicated.
Cell attributes dialog for the structure type indicated.

For this test case, we will assign the 4x4 center cells as structures with the 'Floating breakwater' type. Each cell should contain the modification value for a draft of 2 meters. See the image to the right for an example of the Cell Attributes dialog.


Click the link to download the input files for this case - 2-sms13.1 model-natives.zip

Highly-permeable Breakwater

Cell attributes dialog for the structure type indicated.
Cell attributes dialog for the structure type indicated.

For this test case, we will assign the 4x4 center cells as structures with the 'Piers/docks - High permeability' type. Each cell should contain the modification value for a porous layer thickness of 2 meters deep. See the image to the right for an example of the Cell Attributes dialog.


Click the link to download the input files for this case - 3-sms13.1 model-natives.zip

Semi-permeable Breakwater

Cell attributes dialog for the structure type indicated.
Cell attributes dialog for the structure type indicated.

For this test case, we will assign the 4x4 center cells as structures with the 'Rubble mound breakwater - Low permeability' type. Each cell should contain the modification value for a porous layer thickness of 2 meters deep. See the image to the right for an example of the Cell Attributes dialog.


Click the link to download the input files for this case - 4-sms13.1 model-natives.zip

Rubble Mound

Cell attributes dialog for the structure type indicated.
Cell attributes dialog for the structure type indicated.

For this test case, we will assign the 4x4 center cells as structures with the 'Rubble Mound' type. The "Use modification box should stay unchecked and no value entered. The top of the rubble mound will be the existing elevation as set for the Wave grid. See the image to the right for an example of the Cell Attributes dialog.


Click the link to download the input files for this case - 5-sms13.1 model-natives.zip

Runup

Cell attributes dialog for the structure type indicated.
Cell attributes dialog for the structure type indicated.

For this test case, we will assign the 4x4 center cells as structures with the 'Wave runup' type. The "Use modification box should stay unchecked and no value entered. See the image to the right for an example of the Cell Attributes dialog.


Click the link to download the input files for this case - 6-sms13.1 model-natives.zip

Wall Breakwater

Cell attributes dialog for the structure type indicated.
Cell attributes dialog for the structure type indicated.

For this test case, we will assign the 4x4 center cells as structures with the 'Wall breakwater' type. The "Use modification box should stay unchecked and no value entered. See the image to the right for an example of the Cell Attributes dialog.


Click the link to download the input files for this case - 7-sms13.1 model-natives.zip

Back to CMS-Wave Structures

Retrieved from "https://cirpwiki.info/index.php?title=CMS-Wave/Structures_v1&oldid=14897"