CMS:CardList:Flow

UNDER CONSTRUCTION

Cardname	Value(s)	Information
Model Files
GRID_FILE	<file>_grid.h5
PARAMS_FILE	<file>_mp.h5
Grid Geometry
BATHYMETRY_DATASET	%GRID_FILE% <path to 'Depth' dataset>
GRID_ANGLE	#	a real number - units in degrees
GRID_ORIGIN_X	#	a real number - units in meters
GRID_ORIGIN_Y	#	a real number - units in meters
CELL_LATITUDES	%PARAMS_FILE% <path to 'Lats' dataset>
GRID_CELL_TYPES	<path to 'CellTypes' dataset>
General Parameters
USE_ADVECTION_TERMS	'ON' or 'OFF'
USE_MIXING_TERMS	'ON' or 'OFF'
USE_WALL_FRICTION_TERMS	'ON' or 'OFF'
DRYING_DEPTH	#	a real number - units in meters
SIMULATION_LABEL	'xxx'	string of characters
2D_MODE	'ON' or 'OFF'
NUM_THREADS	#	an integer number
Timing
HYDRO_TIMESTEP	#	a real number - units in seconds
STARTING_JDATE	#####	a 5-digit integer number representing YY and MMM
STARTING_JDATE_HOUR	#	an integer number representing the starting hour.
DURATION_RUN	#	a real number - units in hours
DURATION_RAMP	#	a real number - units in hours
Transport
CALC_SALINITY	'ON' or 'OFF'
CALC_SEDIMENT_TRANSPORT	'ON' or 'OFF'
WATER_DENSITY	#	a real number - units in kg/m^3
WATER_TEMPERATURE	#	a real number - units in degrees celcius
Observation Cells
TIME_SERIES_INCREMENT	#	an integer number - units in seconds
FLOW_RATE_INCREMENT	#	an integer number - units in seconds
Q_TRANS_RATE_INCREMENT	#	an integer number - units in seconds
Tidal Constituents
TIDAL_CONSTITUENTS_BEGIN		denotes beginning of a list of constituents, one per line
TIDAL_CONSTITUENT_xx	# #	tidal constituent - xx replaced with component name - such as M2
		first number is a real number denoting amplitude - units in meters
		second number is a real number denoting phase - units in degrees
		CARD can be repeated up to 37 times without duplication of component name.
TIDAL_CONSTITUENTS_END		denotes end of the constituent list
Output Times List
TIME_SERIES_i	# (###)	i - is replaced by integer from 0 to 4 -- THIS CARD HAS BEEN REPLACED IN SMS 11
		# is integer - number of total times in list
		### is a series of real numbers which denote discrete output times
		each TIME_SERIES_# can be applied to different solution datasets
TIME_LIST_i	# (bb ii ee)	i - is replaced by integer from 0 to 4 -- THIS CARD IS NEW IN SMS 11
		# is integer - number of bb,ii,ee series
		bb is a real number denoting the beginning time of new interval in list
		ii is a real number denoting the new interval in the list
		ee is a real number denoting the ending time of the new interval in list
WSE_OUT_TIMES_LIST	#	an integer number
VEL_OUT_TIMES_LIST	#	an integer number
MORPH_OUT_TIMES_LIST	#	an integer number
TRANS_OUT_TIMES_LIST	#	an integer number
WAVES_OUT_TIMES_LIST	#	an integer number
EDDY_VISCOSITY_OUT_TIMES_LIST	#	an integer number
User-defined cell-specific datasets
HARDBOTTOM_DATASET	%GRID_FILE% <path to dataset>
D50_DATASET	%GRID_FILE% <path to dataset>
Bottom Friction			MANNINGS_N_DATASET	%GRID_FILE% <path to dataset>
MANNINGS_N_CONSTANT	#	a real number
ROUGHNESS_DATASET	%GRID_FILE% <path to dataset>
ROUGHNESS_CONSTNAT	#	a real number
BOTTOM_FRICTION_DATASET	%GRID_FILE% <path to dataset>
BED_SLOPE_FRICTION_FACTOR	'ON' or 'OFF'
WAVE-CURRENT_MEAN_STRESS	'W09','OFF','DATA2','DATA13','HT91', or 'F84'
Cellstrings
TIDAL_CELLSTRING	%PARAMS_FILE% <path to cellstring>
QDRIVER_CELLSTRING	%PARAMS_FILE% <path to cellstring>
HDRIVER_CELLSTRING	%PARAMS_FILE% <path to cellstring>
MHDRIVER_CELLSTRING	%PARAMS_FILE% <path to cellstring>
CROSS-SHORE_CELLSTRING	%PARAMS_FILE% <path to cellstring>
Wind/Wave
ANEMOMETER_HEIGHT	#	a real number - units in meters above mean water level
WIND_INPUT_CURVE	%PARAMS_FILE% <path to dataset>
Output
GLOBAL_VELOCITY_OUTPUT	<file>_sol.h5 <path to dataset>
GLOBAL_WATER_LEVEL_OUTPUT	<file>_sol.h5 <path to dataset>
GLOBAL_MORPHOLOGY_OUTPUT	<file>_sol.h5 <path to dataset>
GLOBAL_TRANS_RATE_OUTPUT	<file>_sol.h5 <path to dataset>
GLBL_CONCENTRATION_OUTPUT	<path to dataset>
GLBL_CONC_CAPAC_OUTPUT	<path to dataset>
Inline Steering
CMS-WAVE_SIM_FILE	<file>.sim
STEERING_INTERVAL	#	a real number - units in hours

---

Documentation Portal