Sediment Transport: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 1: | Line 1: | ||
<big> | <big> | ||
==Lund-CIRP | ==Lund-CIRP== | ||
Camenen and Larson (2005, 2007, and 2008) developed a general sediment transport formula for bed and suspended load under combined waves and currents. | Camenen and Larson (2005, 2007, and 2008) developed a general sediment transport formula for bed and suspended load under combined waves and currents. | ||
Line 22: | Line 22: | ||
{{Equation|<math> \epsilon = h \biggl( \frac{k_b^3 D_b + k_c^3 D_c + k_w^3 D_w}{\rho} \biggr)^{1/3} </math>|2=5}} | {{Equation|<math> \epsilon = h \biggl( \frac{k_b^3 D_b + k_c^3 D_c + k_w^3 D_w}{\rho} \biggr)^{1/3} </math>|2=5}} | ||
== | == van Rijn == | ||
{{Equation|<math> C_{*} = \frac{A_{sb}+A_{ss}}{h} \biggl[ \ | |||
== Watanabe == | |||
== Soulsby-van Rijn == | |||
The equilibrium sediment concentration is calculated as (Soulsby 1997) | |||
{{Equation|<math> C_{*} = \frac{A_{sb}+A_{ss}}{h} \biggl[ \biggl( U_c^2 + 0.018 \frac{U_{rms}^2}{C_d} \biggr)^{0.5} - u_{cr} \biggr]^{2.4} </math>|2=6}} | |||
---- | ---- | ||
Line 32: | Line 38: | ||
|<math> q_{bc} </math> || Bed load transport rate || m<sup>3</sup>/s | |<math> q_{bc} </math> || Bed load transport rate || m<sup>3</sup>/s | ||
|- | |- | ||
|<math> s </math> || Relative density|| | |<math> s </math> || Relative density || - | ||
|- | |- | ||
|<math> \theta_{c} </math> || Shields parameter due to currents || - | |<math> \theta_{c} </math> || Shields parameter due to currents || - | ||
Line 43: | Line 49: | ||
|- | |- | ||
|<math> b_c </math> || Empirical coefficient || - | |<math> b_c </math> || Empirical coefficient || - | ||
|- | |||
|<math> U_c </math> || Current magnitude || m/s | |||
|} | |} | ||
== References == | |||
* Camenen, B., and Larson, M. (2005). "A bed load sediment transport formula for the nearshore," Estuarine, Coastal and Shelf Science, 63, 249-260. | |||
* Camenen, B., and Larson, M., (2008). "A General Formula for Non-Cohesive Suspended Sediment Transport," Journal of Coastal Research, 24(3), 615-627. | |||
* Soulsby, D.H. (1997). "Dynamics of marine sands. A manual for practical applications," Thomas Telford Publications, London, England, 249 p. | |||
* Watanabe, A. (1987). "3-dimensional numerical model of beach evolution," Proceedings Coastal Sediments '87, ASCE, 802-817. |
Revision as of 03:07, 16 January 2011
Lund-CIRP
Camenen and Larson (2005, 2007, and 2008) developed a general sediment transport formula for bed and suspended load under combined waves and currents.
Bed load
The current-related bed load transport with wave stirring is given by
(1) |
Suspended load
The current-related suspended load transport with wave stirring is given by
(2) |
The reference sediment concentration is obtained from
(3) |
where the coefficient is given by
(4) |
with being the dimensionless grain size and the kinematic viscosity of water.
The sediment mixing coefficient is calculated as
(5) |
van Rijn
Watanabe
Soulsby-van Rijn
The equilibrium sediment concentration is calculated as (Soulsby 1997)
(6) |
Symbol | Description | Units |
---|---|---|
Bed load transport rate | m3/s | |
Relative density | - | |
Shields parameter due to currents | - | |
Shields parameter due to waves and currents | - | |
Critical shields parameter | - | |
Empirical coefficient | - | |
Empirical coefficient | - | |
Current magnitude | m/s |
References
- Camenen, B., and Larson, M. (2005). "A bed load sediment transport formula for the nearshore," Estuarine, Coastal and Shelf Science, 63, 249-260.
- Camenen, B., and Larson, M., (2008). "A General Formula for Non-Cohesive Suspended Sediment Transport," Journal of Coastal Research, 24(3), 615-627.
- Soulsby, D.H. (1997). "Dynamics of marine sands. A manual for practical applications," Thomas Telford Publications, London, England, 249 p.
- Watanabe, A. (1987). "3-dimensional numerical model of beach evolution," Proceedings Coastal Sediments '87, ASCE, 802-817.