CMS-Flow Salinity: Difference between revisions
Jump to navigation
Jump to search
(Created page with '{{stub}} Entire section on model control needs to be written. Salinity should be as follows. ==Salinity== This section specifies whether CMS-Flow will compute salinity transport…') |
m (moved CMS:Flow Salinity to CMS-Flow Salinity) |
(No difference)
| |
Revision as of 03:03, 31 July 2009
Entire section on model control needs to be written. Salinity should be as follows.
Salinity
This section specifies whether CMS-Flow will compute salinity transport. When the "Calculate salinity" option is checked, you can specify the initial salinity for the entire domain in parts per thousand (ppt). In addition, you can also specify a salinity concentration curve at each open boundary. If salinity concentrations are not specified at an open boundary, the input concentration is assumed to be the same as the initial concentration.