CMS License: Difference between revisions

From CIRPwiki
Jump to navigation Jump to search
Line 31: Line 31:


== General Cartographic Coordinates Transformation Package (GCTP) [USGS] ==
== General Cartographic Coordinates Transformation Package (GCTP) [USGS] ==
This module contains all the subroutines needed to convert NAD 83 state plane coordinates to NAD 83 geographic positions and conversely. Includes defining constants for NAD 83 coordinate zones. State plane coordinates are entered or computed to 1 mm accuracy, while the latitudes and longitudes entered or computed correspond to approximately 0.3 mm accuracy.
Original Source: https://www.ngs.noaa.gov/PC_PROD/SPCS83/
                          Disclaimer
    This program and supporting information is furnished by the
    Government of the United States of America, and is accepted and
    used by the recipient with the understanding that the United
    States Government makes no warranties, express or implied,
    concerning the accuracy, completeness, reliability, or
    suitability of this program, of its constituent parts, or of any
    supporting data. The Government of the United States of America
    shall be under no liability whatsoever resulting from any use of
    this program. This program should not be relied upon as the sole
    basis for solving a problem whose incorrect solution could
    result in injury to person or property. This program is property
    of the Government of the United States of America. Therefore,
    the recipient further agrees not to assert proprietary rights
    therein and not to represent this program to anyone as being
    other than a Government program.
== State Plane Coordinate System (SPCS) [NOAA NGS] ==
== State Plane Coordinate System (SPCS) [NOAA NGS] ==
== UTM to GEO [MIT] ==
== UTM to GEO [MIT] ==

Revision as of 17:06, 18 October 2023

Notice

The CMS code has been modified from code supplied by the U.S. Army Corps of Engineers, Engineer Research and Development Center (USACE-ERDC). USACE-ERDC makes no guarantees about the results, or appropriateness of outputs, obtained from CMS.

List of conditions

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  • Redistributions of source code must retain the above notice, this list of conditions, and the following disclaimer.
  • Redistributions in binary form must reproduce the above notice, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution.
  • The names of the U.S. Government, the U.S. Army Corps of Engineers, Engineer Research and Development Center, the Coastal and Hydraulics Laboratory may not be used to endorse or promote products derived from this software without specific prior written permission. Nor may the names of its contributors be used to endorse or promote products derived from this software without specific prior written permission.

Disclaimer

THIS SOFTWARE IS PROVIDED BY THE U.S. ARMY ENGINEER RESEARCH AND DEVELOPMENT CENTER, COASTAL AND HYDRAULICS LABORATORY (ERDC-CHL) "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ERDC-CHL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Third-party Use Notice

This version of CMS uses the following third-party libraries and source code:

XMDF Binary Library [Aquaveo]

These routines read and write files using the XMDF formats.

Copyright (C) 2023, Aquaveo, LLC

   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY 
   EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
   THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
   OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 
   TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

General Cartographic Coordinates Transformation Package (GCTP) [USGS]

This module contains all the subroutines needed to convert NAD 83 state plane coordinates to NAD 83 geographic positions and conversely. Includes defining constants for NAD 83 coordinate zones. State plane coordinates are entered or computed to 1 mm accuracy, while the latitudes and longitudes entered or computed correspond to approximately 0.3 mm accuracy.

Original Source: https://www.ngs.noaa.gov/PC_PROD/SPCS83/

                          Disclaimer
   This program and supporting information is furnished by the
   Government of the United States of America, and is accepted and
   used by the recipient with the understanding that the United
   States Government makes no warranties, express or implied,
   concerning the accuracy, completeness, reliability, or 
   suitability of this program, of its constituent parts, or of any
   supporting data. The Government of the United States of America
   shall be under no liability whatsoever resulting from any use of
   this program. This program should not be relied upon as the sole
   basis for solving a problem whose incorrect solution could
   result in injury to person or property. This program is property
   of the Government of the United States of America. Therefore,
   the recipient further agrees not to assert proprietary rights
   therein and not to represent this program to anyone as being
   other than a Government program.

State Plane Coordinate System (SPCS) [NOAA NGS]

UTM to GEO [MIT]

These routines convert UTM to Lat/Longitude and vice-versa, using the WGS-84 (GPS standard) or Clarke 1866 Datums.

Copyright (C) 1998 Massachusetts Institute of Technology, All Rights Reserved.