For each of these test cases, we take a simple 20x20 square cartesian grid with non-variable resolution. The bathymetry is constant 3 meters deep except for the center 4x4 selection of cells which have an elevation of 1 meter. It is these center 4x4 selection of cells which will vary for each of the different structure types in some fashion. A link to the input files is available in each section for that type of structure discussed.

No Structure (default)

Simple bathymetry shown with NO structures indicated.

For this test case, there is no change from the initial setup. No structure cells have been defined.

Click the link to download the input files for this case - 0-sms13.1 model-natives.zip

Bathymetry modification

Cell Attributes dialog for SMS 13.1.

Resulting image showing bathymetry and structure cells indicated.

For this test case, we will assign the 4x4 center cells as structures with the 'Bathymetry Modification' type. Each cell should contain the modification value for a depth of 1 meter (as opposed to its Z-value of 1 meter elevation).

To accomplish this, the user should select all 16 cells, then right click and choose "Cell Attributes", then choose 'Structure', Type should be 'Bathymetry Modification', check the box for "Use Modification", and enter the Depth value of 1.0. See the image below for an example of the Cell Attributes dialog.

Click the link to download the input files for this case - 1-sms13.1 model-natives.zip

Floating Breakwater

File:FloatingBW-structure.png

Simple bathymetry shown with structures indicated.

Click the link to download the input files for this case - 2-sms13.1 model-natives.zip

Highly-permeable Breakwater