CMS-Flow:Features

Boundary Conditions

CMS-Flow has multiple types of boundary conditions which are listed and discussed below. All CMS-Flow boundary conditions are forced at the edges of the domain by use of cellstrings defined with the Surfacewater Modeling System.

Water Surface Elevation Forcing

Two types of Water Surface Elevation Forcing exist for CMS-Flow. Once a water surface elevation curve (or series of curves) is applied, the user is able to display the curve information graphically.

1. Single value for all cells on a cellstring
2. Multiple values on a cellstring (one for each cell)

Single Value

User creates a cellstring for the given boundary and defines a time-series curve. The value for each time on this curve is applied to all cells along the designated cellstring.

Multiple Values

User creates a cellstring for the given boundary and extracts multiple time-series curves from a dataset or database. Each cell along the cellstring is given its own time-series curve information. Examples are:

• Extraction of water surface elevation values from a larger domain solution (ie. Larger CMS-Flow or ADCIRC grid)
• Extraction of tidal constituent information from a tidal database, from which a water surface elevation curve can be generated.

Water Surface Elevation and Velocity Forcing

Users are able to extract both water surface elevations and velocity components from a larger domain solution (ie. Larger CMS-Flow or ADCIRC grid).

River Flow Forcing

User creates a cellstring for the given boundary, chooses a River Flow type for the cellstring, then creates a time-series curve of flow rates. NOTES:

• Total flow rate specified is divided between the total number of cells in the cellstring with each carrying a portion of the total.
• The sign of the flow rate curve is dependent on the direction of flow with respect to the origin (always lower-left hand corner of the grid). This guide should assist in proper assignment.
  • Flow rate from the East - Negative value
  • Flow rate from the West - Positive value
  • Flow rate from the North - Negative value
  • Flow rate from the South - Positive value

Salinity Concentration Forcing

If salinity transport is active for the simulation, the user has the ability to use existing hydrodynamic cellstrings in the interface in order to provide a time-series curve of salinity concentrations.

Units for Boundary Conditions

• Water Surface Elevation - meters ($m$)
• Current Velocity - meters per second ($m/sec$)
• Flow Rate - cubic meters per second ($m^{3}/sec$)
• Salinity Concentration - parts per thousand ($PPT$)