Sediment Transport
Jump to navigation
Jump to search
Lund-CIRP
Camenen and Larson (2005, 2007, and 2008) developed a general sediment transport formula for bed and suspended load under combined waves and currents.
Bed load
The current-related bed load transport with wave stirring is given by
(1) |
Suspended load
The current-related suspended load transport with wave stirring is given by
(2) |
The reference sediment concentration is obtained from
(3) |
where the coefficient is given by
(4) |
with being the dimensionless grain size and the kinematic viscosity of water.
The sediment mixing coefficient is calculated as
(5) |
van Rijn
Watanabe
The total load sediment transport rate of Watanabe (1987) is given by
(6) |
Soulsby-van Rijn
The equilibrium sediment concentration is calculated as (Soulsby 1997)
(7) |
Symbol | Description | Units |
---|---|---|
Bed load transport rate | m3/s | |
Relative density | - | |
Shields parameter due to currents | - | |
Shields parameter due to waves and currents | - | |
Critical shields parameter | - | |
Empirical coefficient | - | |
Empirical coefficient | - | |
Current magnitude | m/s |
References
- Camenen, B., and Larson, M. (2005). "A bed load sediment transport formula for the nearshore," Estuarine, Coastal and Shelf Science, 63, 249-260.
- Camenen, B., and Larson, M., (2008). "A General Formula for Non-Cohesive Suspended Sediment Transport," Journal of Coastal Research, 24(3), 615-627.
- Soulsby, D.H. (1997). "Dynamics of marine sands. A manual for practical applications," Thomas Telford Publications, London, England, 249 p.
- Watanabe, A. (1987). "3-dimensional numerical model of beach evolution," Proceedings Coastal Sediments '87, ASCE, 802-817.