CMS-Flow:Model Control:Output: Difference between revisions

From CIRPwiki
Jump to navigation Jump to search
Line 5: Line 5:


==Output Times Lists==
==Output Times Lists==
*Lists: Change increment and end times for List 1, 2, 3 and 4. Users can provide different time intervals. These lists can be used in the bottom section for specific variables. Also, the same List can be used in several variables' outputs.
The times at which each group is output is determined by the selecting one of four user defined output time series or lists. In SMS versions 10.1 and earlier, the output time series were used. However, because the output time series can become very large for long-term simulations, the time series have been replaced by lists in which the output times are specifying a list of starting, ending and increments. This option is more compact and also makes it easier to manually change the output options in the cmcards file.


==Output Datasets==
==Output Datasets==

Revision as of 21:32, 16 December 2022

CMS Flow Model Control Output Tab Version 13.2.12

Simulation Label

Change Simulation label, if desired. Users ma change the simulation if they changed time intervals or other variables into the model.

Output Times Lists

The times at which each group is output is determined by the selecting one of four user defined output time series or lists. In SMS versions 10.1 and earlier, the output time series were used. However, because the output time series can become very large for long-term simulations, the time series have been replaced by lists in which the output times are specifying a list of starting, ending and increments. This option is more compact and also makes it easier to manually change the output options in the cmcards file.

Output Datasets

Global output refers to the variables that are output on every active cell on the grid. The global output options are specified in Output tab of the CMS-Flow Model Control window. More information on the global output variables, groups and CMS-Flow cards is provided in the sections below. Change List to use for Morphology and Transport

Global output datasets are divided into groups and each group is assigned an output times, and file. A description of the various output datasets and the associated groups is provided in Global Output Datasets

Output Dataset Group Description Units
Current Velocity Velocity Depth-averaged and cell-centered current velocity vector dataset and with respect to local grid coordinates m/s
Current Magnitude Velocity Depth-averaged and cell-centered current velocity magnitude dataset m/s
Water Elevation Water surface elevation Cell-centered water surface elevation m
Eddy Viscosity Eddy viscosity Cell-centered horizontal eddy viscosity m^2/s
Concentration Transport Depth-averaged and cell-centered sediment concentration kg/m^3
Capacity Transport Depth-averaged and cell-centered sediment concentration capacity kg/m^3
Total Sediment Transport Transport Depth-averaged and cell-centered total-load sediment transport kg/m/s
Salinity Transport Depth-averaged and cell-centered sediment concentration capacity kg/m^3
Depth Morphology Cell-centered still water depth m
Morphology Change Morphology Cell-centered morphology (bed) change. Positive is accretion and negative is erosion m
Wave Height Waves Cell-centered significant wave height m
Wave Height Velocity Waves 1.0 Sets the length of the ramp period in which the model forcing is slowly ramped from zero.
Wave Period Waves 1.0 Sets the length of the ramp period in which the model forcing is slowly ramped from zero.

Statistical Output

Output options

For more information about the outputs format, please visit: