CMS:CardList:Flow

From CIRPwiki
Revision as of 13:52, 4 June 2010 by Rdchlmeb (talk | contribs)
Jump to navigation Jump to search


UNDER CONSTRUCTION

Cardname Value(s) Information
Model Files
GRID_FILE <file>_grid.h5
PARAMS_FILE <file>_mp.h5
Grid Geometry
BATHYMETRY_DATASET %GRID_FILE% <path to 'Depth' dataset>
GRID_ANGLE # a real number - units in degrees
GRID_ORIGIN_X # a real number - units in meters
GRID_ORIGIN_Y # a real number - units in meters
CELL_LATITUDES %PARAMS_FILE% <path to 'Lats' dataset>
GRID_CELL_TYPES <path to 'CellTypes' dataset>
General Parameters
USE_ADVECTION_TERMS 'ON' or 'OFF'
USE_MIXING_TERMS 'ON' or 'OFF'
USE_WALL_FRICTION_TERMS 'ON' or 'OFF'
DRYING_DEPTH # a real number - units in meters
SIMULATION_LABEL 'xxx' string of characters
2D_MODE 'ON' or 'OFF'
NUM_THREADS # an integer number
Timing
HYDRO_TIMESTEP # a real number - units in seconds
STARTING_JDATE ##### a 5-digit integer number representing YY and MMM
STARTING_JDATE_HOUR # an integer number representing the starting hour.
DURATION_RUN # a real number - units in hours
DURATION_RAMP # a real number - units in hours
Transport
CALC_SALINITY 'ON' or 'OFF'
CALC_SEDIMENT_TRANSPORT 'ON' or 'OFF'
WATER_DENSITY # a real number - units in kg/m^3
WATER_TEMPERATURE # a real number - units in degrees celcius
Observation Cells
TIME_SERIES_INCREMENT # an integer number - units in seconds
FLOW_RATE_INCREMENT # an integer number - units in seconds
Q_TRANS_RATE_INCREMENT # an integer number - units in seconds
Tidal Constituents
TIDAL_CONSTITUENTS_BEGIN denotes beginning of a list of constituents, one per line
TIDAL_CONSTITUENT_xx # # tidal constituent - xx replaced with component name - such as M2
first number is a real number denoting amplitude - units in meters
second number is a real number denoting phase - units in degrees
CARD can be repeated up to 37 times without duplication of component name.
TIDAL_CONSTITUENTS_END denotes end of the constituent list
Output Times List
TIME_SERIES_i # (###) i - is replaced by integer from 0 to 4 -- THIS CARD HAS BEEN REPLACED IN SMS 11
# is integer - number of total times in list
### is a series of real numbers which denote discrete output times
each TIME_SERIES_# can be applied to different solution datasets
TIME_LIST_i # (bb ii ee) i - is replaced by integer from 0 to 4 -- THIS CARD IS NEW IN SMS 11
# is integer - number of bb,ii,ee series
bb is a real number denoting the beginning time of new interval in list
ii is a real number denoting the new interval in the list
ee is a real number denoting the ending time of the new interval in list
WSE_OUT_TIMES_LIST # an integer number
VEL_OUT_TIMES_LIST # an integer number
MORPH_OUT_TIMES_LIST # an integer number
TRANS_OUT_TIMES_LIST # an integer number
WAVES_OUT_TIMES_LIST # an integer number
EDDY_VISCOSITY_OUT_TIMES_LIST # an integer number
User-defined cell-specific datasets
HARDBOTTOM_DATASET %GRID_FILE% <path to dataset>
D50_DATASET %GRID_FILE% <path to dataset>
MANNINGS_N_DATASET %GRID_FILE% <path to dataset>
ROUGHNESS_DATASET %GRID_FILE% <path to dataset>
BOTTOM_FRICTION_DATASET %GRID_FILE% <path to dataset>
Cellstrings
TIDAL_CELLSTRING %PARAMS_FILE% <path to cellstring>
QDRIVER_CELLSTRING %PARAMS_FILE% <path to cellstring>
HDRIVER_CELLSTRING %PARAMS_FILE% <path to cellstring>
MHDRIVER_CELLSTRING %PARAMS_FILE% <path to cellstring>
Wind/Wave
ANEMOMETER_HEIGHT # a real number - units in meters above mean water level
WIND_INPUT_CURVE %PARAMS_FILE% <path to dataset>
Output
GLOBAL_VELOCITY_OUTPUT <file>_sol.h5 <path to dataset>
GLOBAL_WATER_LEVEL_OUTPUT <file>_sol.h5 <path to dataset>
GLOBAL_MORPHOLOGY_OUTPUT <file>_sol.h5 <path to dataset>
GLOBAL_TRANS_RATE_OUTPUT <file>_sol.h5 <path to dataset>
GLBL_CONCENTRATION_OUTPUT <path to dataset>
GLBL_CONC_CAPAC_OUTPUT <path to dataset>
Inline Steering
CMS-WAVE_SIM_FILE <file>.sim
STEERING_INTERVAL ## of hours