CMS Releases Older

From CIRPwiki
Revision as of 19:45, 12 April 2013 by Rdchlmeb (talk | contribs)
Jump to navigation Jump to search

__notitle__

Older CMS Releases

Version 4.0 Revision 14

Modifications

  • Bug fix - Fixed cdWndvolp calculation for Lagrangian winds.
  • Bug fix - Variable sqrttwo not defined properly.
  • Change - Initial guess of roller energy is set to the previous time step instead of zero and converges much faster.
  • New feature - Added output for fraction of broken waves and wave dissipation coefficient.
  • Change - Modified incipient wave breaking.

Version 4.0 Revision 13

Modifications

  • Change - Modified representative bottom orbital velocity Uwr calculation using parametric method based on JOHNSWAP spectrum
  • Change - Modified bottom friction calculation to that Uwr is used instead of Uw for all of the bottom friction friction formulations except the quadratic one
  • New feature - Added card MORPH_START_TIME which replaces CALC_MORPH_DURING_RAMP
  • New feature - Added GM79 and DSK88 bed friction formulations
  • Maintenance - Verified Soulsby-van Rijn transport formula with example case from Soulsby 1997
  • Maintenance - Verified GM79 bed friction formulation using example from Soulsby 1997
  • New feature - Added bed-correction to Soulsby-van Rijn transport formula
  • Change - Simplified wall friction formulation to avoid iterative solution
  • New features - Added curvature to hydrodynamic simulation statistics

Version 4.0 Revision 12

Modifications

  • Bug fix - Hot start failed to write to hotstart file after starting from hotstart file.
  • New Feature - Save Point files instead of Observation Cells. Ensured this works with Hot Starts
  • Change - Modified HYDRO_TIMESTEP, DURATION_RUN, DURATION_RAMP to be able to read time units.

Version 4.0 Revision 11

Modifications

  • Change - Set default output file names for each group to group names instead of solution file
  • Change - Added cards to turn on/off specific output variables
  • Bug fix - Fixed ascii output of current velocity
  • Maintenance - Cleaned up prestart, read_card_file, and others
  • New Feature - Added Quasi-3D module to calculate 3D dispersion terms
  • Change - Modified cards for wave mass flux velocity and roller flux

Version 4.0 Revision 10

Modifications

  • Change - Removed coefficient calculation for v-momentum equation, except at boundary cells
  • Change - Added static source terms for momentum and salinity
  • New Feature - Added second-order temporal scheme
  • New Feature - Added GAMMA, CUBISTA, ALSMART, and HOAB advection schemes
  • Change - Optimized deferred corrections
  • Change - Improved output display screen
  • New Features - Added rubble mound, culverts, and weirs from Weiming's code.

Version 4.0 Revision 9

Modifications

  • Bug fix - Removed average current velocity output in sim_stats causing error
  • Change - Units of sediment transport from m^2/s to kg/m/s
  • Maintenance - Removed unused variable struct from code
  • Change - Removed positive and negative sediment transport rates from statistics
  • Change - Added statistics output for maximum sediment transport rates
  • Change - Added statistics output for total-load concentration norm residuals

Version 4.0 Revision 8

Modifications

  • Change - Changed variable time step settings (more conservative)
  • Bug fix - Reordered convergence if statements in CMS_Flow
  • Bug fix - Removed mean current velocities from simulation statistics (not used currently)
  • Bug fix - Changed sign of "Stokes forcing" term in momentum equation (negligible effect)
  • Bug fix - Removed wccg reference in roller and replaced with wccg2 (wccg2 created by Alex)
  • Bug fix - Added reinitialization of tmultw in recalculate (to properly recover from crashes)
  • Change - Added cdflux1 variable to be used in recalculate and update (more consistent)
  • Bux fixes - Several bug fixes reported bu Earl Hayter for CMS-Wave (EJH)
  • Bug fix - Added code to not allow vis=0.0 at dry cells (EJH)
  • Maintenance - Removed old code for reading NCCHE type input ASCII files
  • Bug fix - Divide by zero in sed_betat for dry cells due to zero viscosity
  • Change - Reintroduced the wave ASCII output for use with PTM

Version 4.0 Revision 7

Modifications

  • Bug Fix - Replaced wucapac transport formula

Version 4.0 Revision 6

Modifications

  • Bug Fix - Bug fix for multiple XMDF output files. Files are deleted before for coldstarts.
  • Bug Fix - Wind linear interpolation coefficient changed to avoid extrapolation.
  • Bug Fix - Changed observation station output format to F9.4 so that dry cells write -999 for water elevation
  • Bug Fix - Increased tolerance for output in check_time_list to avoid skipping output times
  • Change - Increased interval for sediment transport screen print from 5 to 10

Version 4.0 Revision 5

Modifications

  • New feature - Hybrid solver using both GMRES and Gauss-Seidel
  • New feature - Hydro statistics are used to check for model divergence at every outer loop iteration.

Version 4.0 Revision 4

Modifications

  • New feature - Multiple XMDF output files for each variable group.

Version 4.0 Revision 3

Modifications

  • New feature - Display time step statistics.

Version 4.0 Revision 2

Modifications

  • Change - Variable time stepping algorithm.

Version 4.0 Revision 1

Modifications

  • Bug Fix - NaN wind drag coefficient produced for zero wind speed.

Documentation Portal

Test_Cases