CPT

From CIRPwiki
Revision as of 18:19, 6 July 2011 by *>Anonymous (→‎CPT User's Guide)
Jump to navigation Jump to search

Channel Portfolio Tool (CPT)

POC: Dr. Kenneth Ned Mitchell br\Kenneth.n.mitchell@usace.army.mil br\601-634-2022 br\US Army Engineer Research and Development Center (ERDC) br\Coastal and Hydraulics Lab (CHL)

Active URL (CAC authentication required): https://cpt.usace.army.mil/

Developmental URL (Corps machines only): https://itlgis01.usace.army.mil/CPTIWRWeb

CPT is developmental software that is updated frequently.

CPT User's Guide

Viewing and explanation of Rollup tables

Though Fig. 38 shows a ranked table of sub-reaches along the Lower Mississippi River, one notices that the tons and $-values in the respective columns cannot simply be summed in order to obtain a grand total for the entire section of the River. Doing so would result in traffic that transits multiple sub-reaches being counted more than once, causing the final total to be overstated. Therefore it is necessary to compile a consolidated statement of traffic for the group of sub-reaches selected, wherein cargo transiting more than one channel segment is still only counted once. The CPT Rollup feature provides this capability, as described below.

Selection of multiple sub-reaches

This example will use the same group of Lower Mississippi River sub-reaches as used in Section 6. For other cases, the sub-reaches should be selected using the drop-down menus in the Reach Selection tab.

Explanation of Rollup table contents

Once the sub-reaches are selected and the Preferences saved (2007 is the only year included in the Lower Mississippi River example), continue to the Rollup tab which is located directly to the right of the Flow tab. The Rollup tab includes a Traffic Rollup table and a Ranked Reaches Rollup table. The Traffic Rollup table specifies the tonnage and dollar amounts for each type of traffic. The Ranked Reaches Rollup table shows the traffic type, tons, and dollar amount for each commodity in the rollup. Figure 40 shows the Rollup tab for the Lower Mississippi River example.

File:Figure40 RollupLowerMissRiver.jpg
Fig. 40 – Rollup for Sub-reaches in the Lower Mississippi River - MVN, 2007

br style=clear:both /

Exporting to Microsoft Excel; explanation of fields

The CPT user may also export the rollup details to Microsoft Excel for additional viewing by clicking the Export to Excel button below the Ranked Reaches Rollup table. As described in Section 3.4, a prompt should appear which will allow the user to open the file in Excel or save the file. The Microsoft Excel spreadsheet will list the traffic type, commodity type, tons, and dollar amount for all of the consolidated cargo transiting the group of selected channels, as shown in Figure 41. The data shown in the spreadsheet represent all of the cargo that transits any of the reaches in the selected grouping. The figures do not necessarily represent shipments that transit all of the selected reaches. The key point is that cargo transiting more than one reach within the selected group is nonetheless only counted a single time when compiling the Rollup table.

File:Figure41 ExcelSpreadsheetRollupLowerMissRiver.jpg
Fig. 41 – Excel spreadsheet showing Rollup for the Lower Mississippi River - MVN, 2007

br style=clear:both /

Comparing Projects, Districts, and Divisions

Selection of entities to be ranked

As described in Section 2.2, the CPT user can specify the entities (Divisions, Districts, Projects, or Reaches) to be analyzed by selecting the respective tab on the CPT Home page. This section will present several examples of using this feature to quickly compare waterborne commerce figures at the Project, District, and Division levels, respectively.

After choosing Project-level analysis from the CPT Home screen, choose LRD from the Division menu and then select the Buffalo District (LRB). Next, select all LRB Projects, as shown in Figure 42.

File:Figure42 ProjectSelection.jpg
Fig. 42 – CPT Project Selection within Buffalo District

br style=clear:both /

Tips for faster query times

Under the Preferences tab, select 2007 only to help with query times. When selecting Projects which much higher tonnage levels than those in LRB, it might be necessary to limit the query further by choosing a subset of traffic types and/or commodities.

Viewing of details for entries in Rankings table

Once Preferences have been saved, click the Rankings tab to see the LRB Projects compared to one another, as shown in Figure 43.

File:Figure43 ProjectRankings.jpg
Fig. 43 – LRB Project Rankings for 2007

br style=clear:both /

As indicated by the absence of tabs, the CPT Flow and Rollup features are not yet available for the Project, District, and Division levels. Subsequent versions of CPT will likely incorporate the Rollup feature at these higher levels, while the Flow feature will remain at the Reach level of analysis for the foreseeable future. As with other Rankings tables discussed in previous sections, any entry can be clicked on for further details. Figures 44-46 show the tables and charts on the Details page for Cleveland, OH.

File:Figure44 ProjectDetails.jpg
Fig. 44 – Details tables for Cleveland, OH, 2007

br style=clear:both /

Explanation of Details tables and charts

The figures in these tables are equivalent to those that would be obtained were the user to perform a Rollup query on all of the individual sub-reaches within the Cleveland project.

The draft profile charts for the Cleveland Project in Figs. 45 and 46 are interesting because they show that most of the $-value of cargo uses the deeper drafts available at Cleveland (26 - 27 ft). Furthermore, this high $-value is due to a comparably small amount of imported manufactured metals and flat-rolled iron and steel products, as can be determined by sorting the Harbor Details table by $-value. This information places a higher degree of importance on the deeper drafts at Cleveland Harbor than might otherwise be given.

File:Figure45 ProjectDraftProfile.jpg
Fig. 45 – Draft Profile for Tonnage at Cleveland, OH, 2007

br style=clear:both /

File:Figure46 ProjectDraft$-value.jpg
Fig. 46 – Draft Profile for $-value at Cleveland, OH, 2007

br style=clear:both /

Just as a demonstration of the insights that can be quickly gleaned using CPT to analyze the USACE navigation portfolio at the Division level, Figures 47 – 49 show the draft profile charts for tonnage for SWD, NAD, and LRD, respectively. Note that in each instance the Tonnage Mode under Preferences was set to Docked so as to get a better indication of cargo movements into, out of, and within each Division.

File:Figure47 DivisionDraftProfileTons.jpg
Fig. 47 – Division Draft Profile for Tonnage for SWD

br style=clear:both /

File:Figure48 DivisionDraftProfileTons.jpg
Fig. 48 – Division Draft Profile for Tonnage for NAD

br style=clear:both /

File:Figure49 DivisionDraftProfileTons.jpg
Fig. 49 – Division Draft Profile for Tonnage for LRD

br style=clear:both /

Ranking of items with shoaling effects included

So far the examples presented in this guide have not included shoaling considerations, just to keep things straightforward while introducing the overall layout and functionality of CPT. However, for practical decision-support applications of CPT towards OM budget development, shoaling information needs to be included to help achieve rational allocation of funding. This section will describe how CPT can include shoaling considerations along with commerce data when ranking channels for maintenance dredge funding.

Explanation of Default Shoaling

Because controlling depths for the thousands of channel sub-reaches in the USACE navigation portfolio vary due to local hydraulic conditions, it is a significant information management challenge to include all of this data within comprehensive decision-support package for OM dredging. The CPT development plan calls for several mechanisms to be employed for inclusion of up to date shoaling conditions and channel limiting depths, including linkages to automated channel survey analysis packages, online historical datasets, and manual user upload of channel conditions via the CPT interface. Until these additions have been developed, CPT allows for inclusion of shoaling effects through use of a default shoaling parameter. As discussed in Section 2.3.1, the default shoaling feature assumes a uniform shoaling rate across the entire grouping of selected channels (or Projects, Districts, etc.). The practical effect of employing this feature is that entities are now ranked in terms of the tons or $-value transiting at the deepest of maintained depths.

Interpretation of Rankings

To help demonstrate the effect of shoaling on the Rankings compiled by CPT, return to the Charleston Harbor, SC example used previously in Section 2. Use the Reach level analysis tab and select all of the sub-reaches in Charleston Harbor. Under the Preferences tab, uncheck the Ignore Shoaling box and set the Default Shoaling rate to 3 ft/yr by simply typing a “3” in the input box (do not enter units). Select only year 2007 to ensure consistency with the previous example, and save Preferences. The Rankings tab will reveal the table shown in Figure 50. Comparison of this table with that shown in Fig. 13 shows significant differences in the rankings once the focus is shifted to the deepest 3-ft of maintained depth in each channel.

File:Figure50 RankingsWith3ftShoaling.jpg
Fig. 50 – Rankings of Reaches in Charleston Harbor with 3 ft of shoaling assumed, 2007

br style=clear:both /

Another useful comparison to the previous example using Charleston Harbor is to generate .kml overlays for viewing in Google Earth. Use the default KML Settings under Preferences and export the Rankings table to KML. The resulting Google Earth view is shown in Fig. 51.

File:Figure51 RankingsWith3ftShoalingGoogle.jpg
Fig. 51 – Charleston Harbor Reach Rankings with 3 ft of shoaling assumed, 2007

br style=clear:both /

It is very interesting to note that the Entrance Channel and other sub-reaches that were prominently shown in Fig. 18 when all cargo was included are now of secondary importance, in terms of tons transiting in the deepest 3 feet of maintained depth.

Using Details views to better understand final Rankings

Selection of the entry for Shipyard River in the Rankings table in Fig. 50, which carries roughly 1.8 million tons of cargo that would be disrupted by 3-ft of shoaling, will reveal the draft profile shown in Fig. 52.

File:Figure52 DraftProfile.jpg
Fig. 52 – Draft profile for Shipyard River in Charleston Harbor, SC, 2007

br style=clear:both /