CMS Releases: Difference between revisions

From CIRPwiki

Jump to navigation Jump to search

Latest revision as of 17:51, 7 November 2024

Instructions

Extract the OpenMP DLL file from the zip, if needed. Note: you must have the DLL file in the same directory with executable.
If running the CMS from the SMS, change the location and name of the CMS-Flow executable by clicking on "Edit" | "Preferences...", and then selecting the "File Locations" tab and then clicking on the box under the "Executables" column next to "CMS-Flow" box in the "Models" column. Enter the location and name of the executable and select "Open".

Note: For security reasons, the CMS executables are available for downloaded in a zip file.

Terms and Licensing

The following files have been updated - 01/08/2024

Latest Version of CMS Releases

CMS 5.3 Update 12 (11/07/2024)

Merged Implict/Explicit CMS version Executables - Note: DLL included in zip file.

Released with SMS 13.2. Should work with SMS 13.0+.
64 bit: (Only 64-bit available)

CMS_v5.3.12.zip

Modifications since initial release of 5.3

Update 5.3.12 (11/07/2024)

Added new card to hot start a simulation, 'HOT_START_SIMULATION' (treated same as INITIAL_CONDITION_FILE).
Added error message when either ORIGIN_X/Y card is missing.
Fixed an issue where the CMS-Wave .wav file cannot be written to multiple times in some situations.
Implemented new method for weirs and culverts in SMS 13.4+ and improved summary output for those structures. (Tide gates still to come)
A few minor changes for compiling on Linux

Update 5.3.11 (08/19/2024)

Changed to alternate between recurring two hot start files.
Added folder to start holding test cases for Continuous Integration

Update 5.3.10 (07/16/2024)

Fix for an erroneous Save Point warning that was always written.
Implemented an extra file to store Save Point cards when there are more than 10 defined.
Improved status description updates for Culverts in CMS.
Added ERROR check for missing X/Y Origin cards in .cmcards file.

Update 5.3.9 (04/16/2024)

Fix for Dredge module diagnostic file not found.
Clarified some diagnostic output regarding simulation duration and computed residuals.
Fix for steering variable (NHV_str to NH_str) related to steering issue.

Update 5.3.8 (01/08/2024)

Update for internal path length for tidal database file locations.
Investigating an issue with internal mapping from UTM to Lat/Long in tidal database cases.
- Use State Plane if possible.

Update 5.3.7.1 (12/20/2023)

Began adding CF Compliant naming to HDF5 solution datasets (not yet implemented).
Incremented CMS-Wave version number to 3.3. The code was modified in 2021 but the number was not incremented.
Fix for Tidal boundaries where Offset used - it was doubling the offset.
First Open Source release - several files are modified/moved.
BugFix in Steering for ADCIRC tidal databases with waves.
BugFix for some tidal database forcing issues.

Update 5.3.6 (09/26/2023)

Minor fixes and diagnostic output improvements for Rubble Mound Jetties with SMS 13.3+.
Incorporate fixes for some explicit issues

Update 5.3.5 (09/08/2023)

Fix issues with Tidal Database operation with CMS. Improved screen output.
Fix issue with Grid Angle introduced with SMS 13.1.
Minor GFortran fixes for compiling on HPC/Linux with newer Gnu compiler.

Update 5.3.4 (05/16/2023)

Bug fix for missing zero output time in files when increment > 100 hours.
Added a warning if user-specified boundary angle was too different than internally calculated angle for that boundary.
Fix in CMS Wave GSR Solver to avoid an infinity in certain situations.

Update 5.3.3 (04/07/2023)

Split third-party code (spatial transformations) out as separate linkable libraries needed to Open Source CMS (still in process).
Implemented two new ADCIRC tidal databases (EC2015 and ENPAC2015).

Update 5.3.2 (08/11/2022)

Minor change to reading parameter file for Explicit scheme.
Bug fix when choosing multi-sediment with D35,D50,D90. Fixed array allocation error.
Bug fix in one lookup-table, 'bs_init' routine.
Bug fix in Tools (Option 4) when merging datasets written by SMS instead of CMS solution datasets.

Update 5.3.1 (07/07/2022)

Minor change to Weir Structure specification cards for future integration into SMS 13.x (possibly 13.2).
- Add option to specify Cell IDs in the same manner as for Rubble Mound Jetties.
Updated the array upper limit for several CMS-Wave variables

Initial Release 5.3.0 (05/16/2022)

CMS 5.3 will be released with the upcoming release of SMS 13.2.
New feature in CMS 5.3 - C2SHORE sediment transport algorithm for use only when Waves and Flow are modeled together.

CMS 5.2 Update 19 (05/16/2023)

Merged Implict/Explicit CMS version Executables - Note: DLL included in zip file.

Released with SMS 13.1. Should work with SMS 13.0+.
64 bit: (Only 64-bit available. If 32-bit needed, please contact us.)

CMS_v5.2.19.zip

Modifications since initial release of 5.2

Update 5.2.19 (05/16/2023)

Bug fix for missing zero output time in files when increment > 100 hours.
Fix in CMS Wave GSR Solver to avoid an infinity in certain situations.

Update 5.2.18 (04/29/2022)

Bug fix for DREDGE_RATE card in the dredging module. Was not reading units as it should according to documentation.
Bug fix for divide by zero in WVBRK_Inline.
Bug fix for using Initial Condition file outside the current working directory.
New card 'EXTEND_DURATION_RUN_FOR_HOTSTART' with value 'ON'|'OFF' has been added.
- This will extend the selected DURATION_RUN by the time written in the IC File.
Minor - force user to associate datasets with their choice of Friction type (Manning's, BF, or Roughness Height)
Minor - added better diagnostic output for Dredge Rate showing both daily and per second rates.

Update 5.2.17 (03/29/2022)

Bug fix for Wave structures
Bug fix for Dredge/Placement where no cards exist between PLACEMENT_BEGIN and PLACEMENT_END statements.

Update 5.2.16 (02/25/2022)

Bug fix - Path was not being prepended to the wave file names, so if they weren't in the same directory, it failed.
Added new option to 'Tools' menu for merging datasets from multiple files into one solution file (XMDF).

Update 5.2.15 (01/12/2022)

Bug fix: Error while using Thickness datasets for bed layers
Bug fix: Variables not allocated when Tecplot output enabled.
Bug fix: Divide by zero in some situations during Bottom Friction routines.
Bug fix: Wave Date output in screen/diagnostic output. Changed to 'YYYY-MM-DD HH:MM:ss UTC' format
Bug fix: Added a few extra initialization steps to Wave code
Bug fix: Divide by zero when calculating wall friction coefficient.
Minor: Added better diagnostic output for Avalanching repose angles too large.
Minor: Added extra line of output to screen and diagnostic output while Ramp is in effect with the percentage being applied.
Minor: Added extra code to ensure the acceptance of various versions of horizontal projection

i.e., NAD83, NAD_1983, NAD1983, NAD_1983_PA11, and so forth.

Update 5.2.13 (12/06/2021)

Minor: Modification to new CMS-Wave .std format for a few cards
- New card is 'WV_ROLLER_EFFECT' and it takes the options: 'OFF', '25_PERCENT','50_PERCENT','75_PERCENT', and '100_PERCENT'
- New card is 'WV_LIMIT_OBSERVATION_OUTPUT' to turn off optional output files when observation cells are specified.
- For card 'WV_ENABLE_WIND', a new option exists - 'ON-LIMIT_WAVE_INFLATION'
- For card 'WV_BREAKING_FORMULA', two new options exist - 'MICHE_ORIGINAL' and 'LIFTING_BREAKING'
- Added capability to handle 'HORIZONTAL_PROJECTION' and 'VERTICAL_PROJECTION' blocks (skip over all lines)
- Change options for WV_BOUNDARY_NESTING to "AVERAGE_SPECTRA" and "INVERSE_DISTANCE" instead of "LINEAR" and "MORPHIC"
Bug fix: Small fix for WV_NESTING_CELLS and WV_OBSERVATION_CELLS

Update 5.2.12 (11/15/2021)

Another Bug fix for reading new CMS-Wave cards, WV_NESTING_CELLS and WV_OBSERVATION_CELLS.
Minor change to License for CMS in preparation for making Open Source

Update 5.2.11 (11/08/2021)

Bug fix for reading new CMS-Wave cards, WV_NESTING_CELLS.
Minor changes for linux compilation and consistency.

Update 5.2.10 (10/26/2021)

An update to 'libiomp5md.dll' was needed (1897 KB) with date of 9/10/21.
Added new CMS-Wave input format for options file (.std) similar to how the Flow .cmcards file is written.
Added a new variable for user-definable gamma for the BATTJES-JANSSEN 1978 wave breaking formulation.
- WV_SET_GAMMA_BJ78 is the new card to specify that value and works only for BATTJES-JANSSEN 1978.
Card IGNORE_BRK_RESTRICTION no longer needed to use any Wave Breaking criteria.

Update 5.2.9 (9/30/2021)

Added new option to 'Tools' menu for post-processing the CMS Water Elevation file to create a Maximum WSE file/dataset.
- Works for both XMDF (*.h5) and ASCII (*.dat) files.

Update 5.2.7 (9/20/2021)

Minor: Added more diagnostic output for various types of Derivative Calculation routines.
Added output option to tell CMS to output maximum WSE values over simulation period for each cell.
- new card name for this option is "MAXIMUM_WATER_LEVEL_OUTPUT" and takes 'ON' or 'OFF' as arguments.
- Tested to work for Implicit with both XMDF and ASCII output files. TODO: Test for Explicit.

Update 5.2.6 (6/25/2021)

Bug fix: Fixed error if FALL_VELOCITY, CRITICAL_SHEAR, and COREY_SHAPE_FACTOR cards had no value.
Minor: Added descriptive print statements to structure types instead of an application error.
Minor: Added error message when the Wind file format is not an expected type.
Bug fix: Small fix unset the TELFILE name when a GRID_FILE of '.cart.' type is found.
Added function to parse through a cardfile looking for a specific card and returning the rest of the line.

Update 5.2.5 (6/10/2021)

Bug fix: Hot start with multiple sediment grain sizes was broken due to bad names in path to dataset.
Bug fix: Using ASCII input files wasn't working for salinity.
Bug fix: Small logic error in boundary condition corrected.
Bug fix: Corrected sign error which resulted in a sediment bed-change inconsistency
Bug fix: Initialization was missing for initial condition with ASCII input file for Vector data types.
Minor: Added capability to write out both XMDF and ASCII output files by using "OUTPUT_FILE_TYPE BOTH"
Minor: Ensured both cards for running CMS with initial conditions were excluded from a warning.
Minor: Removed fix for ILUTP solver which caused other issues.
Minor: Clearer error messages in reading from input files.
Added: Command line option 'Tools' to perform a few independent tasks.
- Added two routines - one to convert an actual date to a REFTIME and one to do the reverse.

Update 5.2.4 (06/10/2021)

Bug fix: When using single wave condition, CMS now stores the grid name in a new variable for proper internal reference.
Bug fix: CMS now stores ADCIRC Parent grid and path information correctly for nesting.
Bug fix: Divide by zero during normalization of river flux boundaries corrected.
Bug fix: CMS was looking for a ZONE when Geographic coordinate system was specified.
Bug fix: CMS only recognized NAD83/NAD27/LOCAL for Datum. Modified to accept any of the other variants (NAD 1983, etc)
Bug fix: ADCIRC fort.64 file now uses -9.9999e+04 for dry cells instead of 0.0 m/s. CMS needed a small fix to read properly.
Bug fix: STARTING_JDATE uses a 2-digit year. Fixed logic to make years > 50 = 1900+yr and all other years 2000+yr. (change of 20 to 50)

Update 5.2.2 (09/04/2020)

Fix: Bug fix for divide by zero.
Fix: Correct behavior when checking isolated water cells. Output to screen instead of 'isolated.txt'.

CMS 5.1 Update 16 (02/21/2021)

Merged Implict/Explicit CMS version Executables

Released with SMS 13.0. Should work with SMS 12.3+.
64 bit: (Only 64-bit available. If 32-bit needed, please contact us.)

CMS2D_V5p1r16_dll.zip

Modifications since initial release of 5.1

Update 5.1.16 (02/21/2021)

Bug fix: STARTING_JDATE uses a 2-digit year. Fixed logic to make years > 50 = 1900+yr and all other years 2000+yr. (change of 20 to 50)

Update 5.1.15 (05/21/2020)

Change: Corrected screen output spelling in a few cases.
Change: Improved logic for reading input from keyboard while running from Command Prompt.
Comment: Last major change in this version before moving to 5.2 for release of SMS 13.1.

Update 5.1.14 (04/20/2020)

Bug fix: Avoid accessing unallocated array in some situations (boundaries.F90)
Change: Increased number of reflection cells allowed and consolidated this value between inline and stand-alone.
Change: Improved handling of Isolated ocean cells - output all values to a text file instead of showing only the first, then STOP.

Update 5.1.13 (01/07/2020)

Bug fix: CMCARDS was only able to read a maximum of 1000 lines. Anything else was ignored.
Change: Improved printing of information regarding Statistics process types.
New: Added the ability to put advanced cards into 'advanced.cmcards' for processing in desired.

Update 5.1.12 (10/25/2019)

Bug fix: Corrected display of Rubble Mound Structure cells in diagnostic output
Bug fix: Removed extra output file of Hard Bottom warning cells
Change: Increased the limit to the maximum number of save points from 255 to 1000. Added error messages.

Update 5.1.11 (09/10/2019)

Change: Moved all repository folders up one level, removing "Trunk" folder which was not needed.
Change: If any Unknown Cards are read from the parameter file, CMS gives the user a chance to stop and fix.
Change: Added __linux definition to CMake options.
Change: Output message when Boundary Cellstring is defined, but lacks cells (SMS issue)
Bug fix: Corrected infinite loop experienced in Linux during interpretation of command line arguments.
Bug fix: Fixed issue with d16/d50/d84 percentile allocatable array
Buf fix: Fixed issue with missing Hard Bottom Dataset
New Feature: Dredge Module is now available using ASCII input/output.

Update 5.1.10 (8/29/2019)

Change: Cleaned up the initial status section for screen and diagnostic file output.
Change: Added years to reoccurring report of elapsed time. CMS only outputs the time fields as needed.
Change: Updated instructions for CMake linux utility regarding include file changes.

Update 5.1.9 (08/27/2019)

Bug fix: Heatflux Windows vs Linux options and output.
Bug fix: Corrected issue with `atan2` operation in inline/standalone wave code.
Bug fix: Issue with reading in OWI formatted .win and .pre files.
Bug fix: Fixed issue with reading blank percentile datasets from SMS when using multiple grain sizes.
Change: Removed the requirement for the .xy file to be used with OWI wind format - still allowed if present.
Change: Modifications needed for Dredge Module and interface.
Change: Removed compile-time option for the Dredge Module.
Change: Eliminated need to change compile-time options depending on Linux or Windows machines.
Info: A few other minor modifications.

Update 5.1.8 (05/01/2019)

Bug fix: Needed to check that a boundary array was already allocated before an allocation in rare cases.
Bug fix: Implemented a fix for a rare 'divide by zero' error.
Bug fix: Hot Start divide by zero error corrected.
Bug fix: Issue with simplified multiple sediment transport definition thinking bed layer was already defined.
New feature: Implemented variable Morphology Acceleration Factor using a user-defined duration, MORPH_ACCEL_RAMP_DURATION.
New feature: Implemented a card, WRITE_ACCEL_RAMP_INFO, to write out the timing of the variable acceleration factor.
New feature: Implemented a command line argument, INLINE, to run the inline wave model instead of stand-alone.
New feature: Print header information for Dredge Module to normal location in CMS_DIAG.TXT file.
Info: Minor changes to screen and diag file output, eliminating duplicate information.
Info: Minor changes when outputting time information to include number of days.
Info: Implemented the function equivalents, toUpper and toLower, to the subroutines for converting case.

Update 5.1.7 (02/25/2019)

Bug fix: Read the friction file properly if using ASCII Input.
Change: Write the Wave Date out in a better format for screen text.
Bug fix: Resolved a file naming issue when full paths are specified on command line.
Change: Linux CMake now compiles with OpenMP for parallelization.

Update 5.1.6 (02/13/2019)

Update: Implemented input file changes for Weir and Rubble Mound Jetty structures to match the SMS 13.0+ menu interface design.
Bug fix: Resolved a few minor issues related to Explicit scheme with parallelization.
Bug fix: Resolved an issue with hot starting with waves not synchronizing to the right wave condition.
New feature: EXPLICIT_PRINT_INTERVAL allows user specified interval of time step output.
Change: Added an additional line of output text to two locations when Morphologic Acceleration Factor used.

Update 5.1.5 (10/30/2018)

New feature: Added Stand-alone wave code that is run when only wave input is specified. This version is basically identical to last stand-alone code.
- Info: Diagnostic information about stand-alone wave parameters are written to screen and diagnostic file.

Update 5.1.4 (10/17/2018)

Info: Minor version and date changed. No code changes at all.

Update 5.1.3 (10/16/2018)

New feature: Updated Hot Start routines to work with ASCII input and output. Needs further testing.
- Info: All ASCII Hot Start files are written to the subfolder "ASCII_HotStart"
Info: Some work still needs to be done to fully integrate some seldom-used datasets.

Update 5.1.2 (10/15/2018) [incorporating some developmental features from a non-versioned branch]

New feature: Added card (WRITE_ASCII_INPUT_FILES ON|OFF) to tell CMS to write out ASCII versions of all input
- Info: All ASCII input files are written to the subfolder "ASCII_Input"
New feature: Added card (OUTPUT_FILE_TYPE XMDF|ASCII) to tell CMS to write only ASCII solutions
- Info: All ASCII output/solutions are written to the subfolder "ASCII_Solutions"
- Info: All ASCII Statistics files are written to the subfolder "Statistics"
Change: Updated internal wave code to latest version, 30 March 2018

Update 5.1.1 (10/15/2018)