CMS-Wave Model Parameters: Difference between revisions
Jump to navigation
Jump to search
| Line 20: | Line 20: | ||
= Output control = | = Output control = | ||
== Limit observation output == | |||
== Radiation stresses == | |||
==Breaking type=== | |||
= Options = | = Options = | ||
To setup the model parameters for CMS-Wave: | To setup the model parameters for CMS-Wave: | ||
Revision as of 14:49, 15 December 2022
Parameters
CMS Wave Plane mode
Source terms
Current interaction
Bottom friction
For a detail explanation of how Bottom Friction variable is used on the CMS Wave model, see Bottom Friction
Surge Fields
Wind Fields
Matrix Solver
Boundary control
Water level and wind information are optional source as specified under Wave Source in addition to the spectral input data.
Source
Interpolation
Computational spectral grid
Slides
Case data
Output control
Limit observation output
Radiation stresses
Breaking type=
Options
To setup the model parameters for CMS-Wave:
1. Go to CMS-Wave, Model Control, Options and turn on Allow wetting and drying and Bed friction
2. Users can also specify constant or varied forward and backward reflection coefficients in Settings,
To read more about CMS Wave defintions, see CMS Wave Model Control Definitions
CMS-Wave Model Control File formats
The CMS-Wave Options File (*.std) can have one of 3 input formats. Click one of the options below for the format description.
| 1. No cards - order of values on one line is very important. | (Used with SMS 11.1 and previous) |
| 2. Card-based - [value] [!card name] | (Used with SMS 11.2 to 13.1) |
| 3. Card-based - [card name] [value(s)] | (Used with SMS 13.2 and after) |