All public logs

Combined display of all available logs of CIRPwiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 23:56, 24 April 2025 User account KayleighLittler talk contribs was created
• 19:04, 21 April 2025 Rdchlmeb talk contribs created page File:CMS v5.4.4.3b.zip
• 19:04, 21 April 2025 Rdchlmeb talk contribs uploaded File:CMS v5.4.4.3b.zip
• 17:46, 21 April 2025 Rdchlmeb talk contribs created page File:CMS v5.4.4.3.zip
• 17:46, 21 April 2025 Rdchlmeb talk contribs uploaded File:CMS v5.4.4.3.zip
• 06:01, 20 April 2025 User account AutumnGoodin talk contribs was created
• 14:38, 16 April 2025 Rdchlmeb talk contribs created page File:Aeolis simulation.png
• 14:38, 16 April 2025 Rdchlmeb talk contribs uploaded File:Aeolis simulation.png
• 21:40, 15 April 2025 Rdchlmeb talk contribs moved page CMS-Flow NUmerical Methods: Wetting and Drying to CMS-Flow Numerical Methods: Wetting and Drying without leaving a redirect (Misspell)
• 21:35, 15 April 2025 Rdchlmeb talk contribs deleted page CMS User Manual (content was: " Doyle, Please start putting the CMS User Manual here. This page is NOT linked to from any other page (orphan). We will link it and parse out pieces as they are completed. Thanks, Alex User_Guide_001 User_Guide_002 User_Guide_003 User_Guide_004 User_Guide_005 User_Guide_006 User_Guide_007 User_Guide_008 User_Guide_009 User_Guide_010 User_Guide_011 User_Guide_012 User_Guide_013 User_Guide_014 User_Guide_015...")
• 21:35, 15 April 2025 Rdchlmeb talk contribs deleted page 3-Numerical Methods (content was: "=Numerical Methods= ==Overview== CMS-Flow has both implicit and explicit solution schemes. The explicit solver is designed for dynamic problems with extensive wetting and drying that require small computational time steps, while the implicit solver is intended for simulating tidal- and wave-induced circulation at tidal inlets, navigation channels, and adjacent beaches. A...", and the only contributor was "Rdchldlj" (talk))
• 21:35, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 029 (content was: "=19 Appendix I: UTM and State Plane Zones= The main purpose of the State Plane coordinate system was to designe a conformal mapping system which minizes local distortion to less than 1/10,000. In order to achieve this accuracy, some states were divided into smaller zones called FIPS (Federal Information Processing Standard) zone. The table below lists the US zone names FIP...", and the only contributor was "Rdchldlj" (talk))
• 21:35, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 028 (content was: "=17 Appendix G: Inverse Distance Interpolation= The inverse-distance interpolation also referred to as Shepard interpola-tion is given by (Shepard 1968) {{Equation|<math>\phi(\overrightarrow{x}) = \sum_{i=1}^N w_i \phi_i</math>|17-1}} where the interpolation weights are given by {{Equation|<math>w_i = \frac{d_i ^{-\rho_s}}{ \sum_{j} d_j^{-\rho_s}}</math>|17-2}} where...", and the only contributor was "Rdchldlj" (talk))
• 21:34, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 027 (content was: "=16 Appendix F: Piecewise Lagrangian Polynomial Interpolation= Piecewise polynomials in Lagrange form are given by {{Equation|<math>L(x) = \sum_{j=1}^{n+1} y_j l_j (x)</math>|16-1}} where : y_j= interpolation data values corresponding to x_j : n = order or the interpolation polynomial : l_j(x) = Lagrange basis polynomials given by {{Equ...", and the only contributor was "Rdchldlj" (talk))
• 21:34, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 026 (content was: "=15 Appendix E: Goodness of Fit Statistics= ==Brier Skill Score== The Brier Skill Score (BSS) is defined as {{Equation|<math>BSS = 1 - \frac{\langle(x_m - x_c)^2 \rangle}{\langle (x_m - x_0)^2 \rangle} </math> |A1}} where the angled brackets indicate averaging, subscripts m, c, and 0 indi-cate measured, calculated, and initial values, respectively. The BSS ranges betwee...", and the only contributor was "Rdchldlj" (talk))
• 21:34, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 025 (content was: "=14 Appendix D: Determining the sediment size Classes= In order to determine the appropriate grain sizes for a simulation it is useful to be able to determine ahead of time the size class fractions using a log-normal distribution for different median grain sizes and sorting. The Matlab example below determines the grain size distribution given the smallest and largest grai...", and the only contributor was "Rdchldlj" (talk))
• 21:34, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 023 (content was: "=12 Appendix B: Description of Output Files= ==XMDF Solution Files (Binary Format)== By default, CMS global solution output files are written in a binary format called XMDF which is based on the HDF5 format which was developed to allow for portability between Windows and non-windows platforms. At present, the SMS reads and writes XMDF files. Additional binary formats ar...", and the only contributor was "Rdchldlj" (talk))
• 21:34, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 024 (content was: "=13 Appendix C: Matlab Scripting= Scipting refers to the automation of running multiple CMS runs with dif-ferent parameters, without manually having to create and edit each alternative. The scripting process can include the following steps: :1. Setting up alternatives :2. Creating batch file :3. Plotting and analyzing results Scripting can be done using a variety o...", and the only contributor was "Rdchldlj" (talk))
• 21:34, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 022 (content was: "=11 Appendix A: Description of Input Files= ==CMS-Flow== ===Telescoping Grid File (*.tel)=== The telescoping Grid File is saved in SMS 11.0 when saving a telescoping grid. The first line contains a header which says “CMS-Telescoping”. The second line contains four elements corresponding to the (1) grid orientation ''theta'', (2) grid origin in the x-direction ''x₀'', (3) grid origin in the y-direction y0, and (4) total number of cells ''N'' (including inactive...")
• 21:34, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 021 (content was: "=10 References = Andrews, D.G., and McIntyre, M.E. 1978a. An exact theory of nonlinear waves on a Lagrangian mean flow. Journal of Fluid Mechanics. 89, 609-646. Aquaveo. 2010. SMS: XY Series Files (*.xys). http://www.xmswiki.com/xms/SMS:XY_Series_Files_(*.xys). Armanini, A., and di Silvio, G. 1986. “Discussion on the paper ‘A depth-averaged model for suspended sedime...", and the only contributor was "Rdchldlj" (talk))
• 21:34, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 030 (content was: "=20 Appendix J: Glossary= '''A''' Abrasion: The mechanical wearing away by rock material transported by wind or water Active Bed: The portion of the bed sediment that is being transported. '''Active Layer''': The top surface layer of sediment in which sediments are subject to exchange with those moving with the flow (entrainment or deposition). Accretion: The accumulati...", and the only contributor was "Rdchldlj" (talk))
• 21:34, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 020 (content was: "=9 List of Symbols= {| |- ! Variable ! Meaning ! Units(SI) |- | <math>f_c</math> | Coriolis parameter | 1/s |- | h | Time -averaged total water depth | <math>h = \xi + \nu</math> | m |- | <math>\bar{\nu}</math> | Time-averaged water surface elevation above the still water line | m |- | <math>\xi</math> |Still water depth | m |- |<math>S^m</math> |S...", and the only contributor was "Rdchldlj" (talk))
• 21:34, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 019 (content was: "=8 Summary = The Coastal Modeling System (CMS) User Manual serves as a reference guide to the applied theory, numerical methodology, and the application of the modeling system. The CMS is an integrated wave, current, sediment transport and morphology change model available in the Surface-water Modeling System (SMS). The first chapter on theoretical background summarizes...", and the only contributor was "Rdchldlj" (talk))
• 21:33, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 018 (content was: "File:fig_7-30.png Figure 7-30. Highlighted Feature Arc with the positive direction shown by the arrows. :5. If necessary, the arc direction may be changed by clicking on the Select Feature Arc File:345-1.png tool, and selecting the feature arc by right-clicking it once and selecting the option: Reverse Arc Direction (see figure below). The same applies for featur...", and the only contributor was "Rdchldlj" (talk))
• 21:33, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 017 (content was: "File:fig_7-8.png Figure 7-8. Input of time series water surface elevation data into an observation point. ''Water level data plotting from Feature Points'' Time plots can be compared within SMS through their software plotting package. To create a plot: :1. Select ''Display|Plot Wizard|Time'' Series and select ''Next''. The ''Function is Scalar'', and the ''Water Ele...", and the only contributor was "Rdchldlj" (talk))
• 21:33, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 016 (content was: "=4 Surface Roller Model Setup= The surface roller model is run after each CMS-Wave and before each CMS-Flow run. It runs on the wave grid but is a separate model and module within the CMS. The surface roller model parameters are set within the CMS-Flow cmcards for convenience and the cards are described in the table below. For more information on the surface roller model s...", and the only contributor was "Rdchldlj" (talk))
• 21:33, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 015 (content was: "=3 CMS-Wave Model Setup = Spectral waves or wave parameters can be generated for the wave grid forcing, or wind direction and speeds can provide the necessary infor-mation for wind- wave generation. Full (directional) spectra can be im-ported into the SMS for the CMS-Wave, as well as simplified wave pa-rameters (angle, wave height, and period, etc). The spectral energy f...", and the only contributor was "Rdchldlj" (talk))
• 21:33, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 014 (content was: "=Output Group File Specification= For large grids or long simulations, outputting all of the variables to a single XMDF solution file can lead to a file that is unmanageable. To help reduce to the size of the output files each variable group listed in Table 54 can be output into separate files. The table below lists and describes the CMS-Flow cards used to specify the outp...", and the only contributor was "Rdchldlj" (talk))
• 21:33, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 013 (content was: "==Hard Bottom== Hard Bottom is a morphologic constraint that provides the capability to simulate mixed bottom types within a single simulation. This cell-specific feature limits the erodability of the constrained cells down to a specified depth below the water surface. During sediment transport calculations, exposed hard bottom cells may become covered through deposition....", and the only contributor was "Rdchldlj" (talk))
• 21:32, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 012 (content was: "File:fig_2-87.png Figure 2-87. Example of the total load adaptation length specification within the Adaptation section within the Sediment tab of the CMS-Flow Model Control window in SMS 11.1. Example 2-80. Total load adaptation length as the weighted averaged of the bed and suspended load lengths ---- ADAPTATION_METHOD_TOTAL WGHT_AVG_BED_SUSP_LENGTH ADAP...", and the only contributor was "Rdchldlj" (talk))
• 21:32, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 011 (content was: " ---- =Notes<nowiki>:</nowiki>= :• The size classes are constant for the whole domain. :• The fraction of each sediment size class in the bed describes the bed composition. :• Increasing the number of sediment size classes increases the com-putational time because each size class requires its own governing equations. :• If not size classes are specified, then...", and the only contributor was "Rdchldlj" (talk))
• 21:32, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 010 (content was: " =Initial Condition= The salinity initial condition is specified from within the Salinity tab of the ''CMS-Flow Model Control'' window (see Figure 2 74. Two options are available for the initial condition: (1) a constant value, or (2) a user-specified dataset. The CMS card used to specify the salinity initial condition is described in Table 2-68. Table 2-66. CMS card use...", and the only contributor was "Rdchldlj" (talk))
• 21:32, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 009 (content was: "=Extracted Water Level Tidal Constituents from a Database= CMS supports extracting water level tidal constituent information directly from regional and world tidal databases. The constituent information is then used internally to generate boundary information along cellstrings according to {{Equation|<math>\bar{\eta}_E (\overrightarrow{x},t) = \Sigma f_i A_i cos (\omega_i...", and the only contributor was "Rdchldlj" (talk))
• 21:32, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 008 (content was: "Example 2-44. Constant WSE BC specification using a block structure. ---- BOUNDARY_BEGIN CELLSTRING "Boundaries.bid" 1 ![file name] [cellstring ID] WSE_BEGIN VALUE 0.0 m !constant water level, units optional GRADIENTS 1.E-5 0.0 !Optional, global coordinate system ADJUSTMENT ON !Optional, turns on the forcing corrections...", and the only contributor was "Rdchldlj" (talk))
• 21:32, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 007 (content was: "The extracted water levels are stored in the CMS-Flow Model Parameters file. Below is an example of how the CMS-Flow card for the extracted wa-ter level times boundary. Example 2-33. Extracted water level time series boundary specification using a single card. ---- MDRIVER_CELLSTRING "Flow_mp.h5" "PROPERTIES/Model Params/Boundary" ---- =Step-by-Step Instructions: Ext...", and the only contributor was "Rdchldlj" (talk))
• 21:32, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 006 (content was: "File:fig_2-47.png Figure 2-47. CMS-Flow Boundary Conditions Window in SMS 11.1 =Wall Boundary= The wall boundary condition is a closed boundary and is applied at any cell face between wet and dry cells. Any unassigned boundary cells at the edge of the model domain are assumed to be closed and are assigned a wall boundary. A zero normal flux to the boundary is applied...", and the only contributor was "Rdchldlj" (talk))
• 21:32, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 005 (content was: "=Oceanweather Wind File= The Oceanweather format uses separate ASCII files to specify the wind speeds, atmospheric pressure and grid coordinates. The CMS-Flow cards used to specify the Oceanweather files are described below. Table 2-36. CMS-Flow cards used to specify the Oceanweather wind, atmospheric pressure and grid coordinates files. {|class="wikitable" |- !Card !...", and the only contributor was "Rdchldlj" (talk))
• 21:31, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 004 (content was: "=Wall Friction= Two boundary conditions are available for the tangential flow at closed boundaries: :1. Free-slip: No tangential shear stress (no wall friction); :2. Partial-slip: Tangential shear stress (wall friction) calculated based on the log law. Wall friction enhances the flow drag perpendicular to any closed bounda-ry. Assuming a log law for a rough wall, the pa...", and the only contributor was "Rdchldlj" (talk))
• 21:31, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 003 (content was: " ---- =Hydrodynamics= The hydrodynamic parameters are divided into different groups: Water Properties, Bottom Friction, Wall Friction, Eddy Viscosity, Wave Mass Flux, and Wind and Atmospheric Pressure. Each group is discussed in detail in the following sections. A brief over is provided on what the options and parameters are, where to change them and other pertinent infor...", and the only contributor was "Rdchldlj" (talk))
• 21:31, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 002 (content was: "=2 CMS-Flow Model Setup= ==Overview of Input and Output== The CMS-Flow (and also for most morphodynamic models) input and output can be classified as: :1. Input ::a. Control file (model parameters, options, pointers to other files). ::b. Geometry (grid). ::c. Initial condition (bathymetry, bed composition, etc.). ::d. Boundary conditions :2. Output ::a. Transi...", and the only contributor was "Rdchldlj" (talk))
• 21:31, 15 April 2025 Rdchlmeb talk contribs deleted page User Guide 001 (content was: "=1 Introduction= Buttolph et al. (2006) described the graphical interface for CMS in the SMS Version 9.0 (Zundel 2006). A summary of key features of the interface is provided in this chapter to familiarize users with the CMS-Flow interface. The interface is designed to facilitate the model setup and create input files and as well as view output. The interface described her...", and the only contributor was "Rdchldlj" (talk))
• 21:28, 15 April 2025 Rdchlmeb talk contribs created page Category:Aeolis (Created page with "Pages created for the Aeolis interface in SMS 13.4+.")
• 19:58, 15 April 2025 Rdchlmeb talk contribs created page File:Aeolis modelControl.png
• 19:58, 15 April 2025 Rdchlmeb talk contribs uploaded File:Aeolis modelControl.png
• 19:58, 15 April 2025 Rdchlmeb talk contribs created page Aeolis (Created page with "{{TOC right}} =Background= In FY2024, CIRP provided funding to implement the ability to create and store Aeolis simulations from within SMS 13.4+. Presently (April 2025), the following components for this interface have been implemented and are being tested: * Grid Creation * Boundary Conditions * Model Control =Grid Creation= A 2D grid for Aeolis can be created by the user. The steps for this process are given below: # Ensure a Display Projection has been assigned fo...")
• 19:55, 15 April 2025 Rdchlmeb talk contribs created page File:Aeolis BC.png
• 19:55, 15 April 2025 Rdchlmeb talk contribs uploaded File:Aeolis BC.png
• 15:27, 14 April 2025 Rdchlmeb talk contribs created page File:CMS v5.3.12.2.zip
• 15:27, 14 April 2025 Rdchlmeb talk contribs uploaded File:CMS v5.3.12.2.zip
• 21:32, 9 April 2025 Rdchlmeb talk contribs created page File:CMS v5.4.4.2.zip